iFixit - Answers With Device "Kitchen Appliance"

Samsung Microwave: не работают кнопки меню

Mon, 20 Apr 2026 23:00:34 -0700

електронные кнопки меню не реагируют на прикосновение.что-то с электроникой?

Impressa A9: не молит кофе совсем

Tue, 07 Apr 2026 09:14:16 -0700

машина не молит кофе

cooker: Ninja Foodi FD 300 series Has anyone gotten the Err8 error?

Sat, 01 Aug 2026 06:52:43 -0700

Not having any luck finding other people online with these problems. YouTube is completely unhelpful. Ninja says I need to replace the base which is almost as much as a new air fryer.

⟐ Answered августа 01, 2026 at 6:52 GMT-7

Hamilton Beach Coffee Maker: Coffee maker is slowly leaking clear water from the bottom.

Fri, 31 Jul 2026 18:02:57 -0700

I believe my Hamilton Beach 12 cup coffee maker 49465R needs a new hose, but where do I get one? The company doesn't sell them, eBay doesn't have any, ifixit doesn't have any. Looking for advice on how to DIY a hose. Is the tubing similar from one coffee maker to another...in other words, could I buy a tube from say DeLonghi and cut it to fit?

⟐ Answer accepted июля 31, 2026 at 18:02 GMT-7

Electrolux Over-the-Range Microwave E30MH65G: If microwave does not work

Fri, 31 Jul 2026 17:55:15 -0700

Microwave is on but not hot

⟐ Answered июля 31, 2026 at 17:55 GMT-7

Magic Bullet NutriBullet: Cup stuck to base of NutriBullet

Thu, 30 Jul 2026 14:15:37 -0700

The cup of the magic NutriBullet is stuck to the base , can’t remove it

⟐ Commented июля 30, 2026 at 14:15 GMT-7

Microwave: How do I fix the door latch on my Samsung microwave?

Wed, 29 Jul 2026 23:52:44 -0700

My microwave door latch/latch mechanism spontaneously stopped working, and now the door won't stay closed, and thus the microwave won't turn on... unless you close it just right and either hold it exactly shut while it's on, or use rare earth magnets (the exterior is steel) to keep it shut. But if something makes the house, or that wall, vibrate for any reason, the microwave is likely to stop, as the latch mechanism senses the door opened slightly. (Otherwise imperceptibly, but bonus points for stringent safety features!)

This style microwave does not have a button to open the door, one just pulls the stationary handle.

The microwave in question is a Samsung 1.7 kW over-the-range style, and I've included pictures, if that helps.

⟐ Answer accepted июля 29, 2026 at 23:52 GMT-7

Microwave: My microwave door won’t latch

Wed, 29 Jul 2026 23:49:24 -0700

My microwave door won’t latch . I check hooks latch they are good n screws to

⟐ Commented июля 29, 2026 at 23:49 GMT-7

Countertop Ice Maker: Frigidaire countertop icemaker won't take up water

Wed, 29 Jul 2026 13:14:10 -0700

Ice maker had started making tiny pieces of ice, so I ran a cleaning cycle with commercial ice maker cleaning solution, and scrubbed the inlet with a toothbrush. I ran another cleaning cycle with clear water, drained it, and then refilled the reservoir with clean water. The machine won't take any water from the reservoir, either on the cleaning or icemaking cycles. It attempts to start the cycle, then stops, and the light to add water comes on. The water level remains at the fill line.

⟐ Commented июля 29, 2026 at 13:14 GMT-7

Ninja Coffee Bar® Single-Serve System: Ninja coffee maker suddenly does not recognize the Tea brewing basket

Tue, 28 Jul 2026 16:12:00 -0700

Out of nowhere, my Ninja cp301 (similar to the unit I selected for this post) does not recognize the tea brewing basket. When I place the orange coffee brewing basket in the unit, it works fine.

Steps I’ve taken:

“Burped” the unit by turning it upside down and lightly striking it with the palm of my hand.
Cleaned the unit with a paper towel. Removed a lot of buildup from where the hot water drips down into the brew basket.
Cleaned the tea brew basket and examined it for damage
Consulted the owner’s manual for troubleshooting tips

Symptoms:

When I place the tea brewing basket in the unit, the machine’s lights do not indicate “Tea”. Pressing start, on any setting, causes 5 beeps and both the Tea and Coffee light indicators flash. (This is also what happens with no brew basket in the machine)

The coffee brew basket works fine. The machine just suddenly stopped recognizing the tea brew basket for no apparent reason. I had just used the machine to make tea about 3 hours before I noticed the failure.

My question:

How does the machine “know” which basket is inserted? There is something about my tea brew basket that isn’t triggering the proper sensors or something. I doubt running the cleaning function will help, but I am trying that next.

I would greatly appreciate any help or advice on how to get things back in order.

Thanks,

Jason

⟐ Commented июля 28, 2026 at 16:12 GMT-7

KitchenAid Mixer: My 4KSM5PSGR proline series mixer stopped working

Tue, 28 Jul 2026 06:59:02 -0700

I have a KitchenAid Pro Line 4KSM5PSGR mixer that stopped working under load.

I opened it up and found the worm gear is worn/stripped.
Where can I get a replacement?

When I ran the motor without the gears attached, it makes a bad noise. I don't know if the carbon brushes need to be replaced.
How can I tell if the brushes need to be replaced or if it is something else?

I've attached some images of the brushes.

UPDATE: Here is a picture of the commutators

⟐ Commented июля 28, 2026 at 6:59 GMT-7

Microwave: Blown transformer in a Panasonic inverter microwave

Tue, 28 Jul 2026 01:22:52 -0700

The transformer on my old Panasonic NN-A554W's magnetron power supply board has blown, but the board would be an easy swap if only I could find one :/

I am worried about the magnetron (2M236-M42) being the cause of the problem too but both of my multimeters just read 0 ohms between its pins, and I'm not sure if that's normal or the meters just aren't accurate enough. There's no short between them and its case.

Does anybody have experience with these boards? Its part number is A6645M304GP, and it looks like a lot of other models use boards that look identical but have different part numbers. I have even found a site saying that this magnetron can be used with an A66454T05AP or F66454T07AP board. They do look the same as my board, but do they have hidden differences?

Thanks if anyone can give me any pointers.

⟐ Answered июля 28, 2026 at 1:22 GMT-7

DeLonghi ESAM Family: diferenta intre 4200 s et1 vs 4200 b

Tue, 28 Jul 2026 00:08:31 -0700

diferenta intre 4200 s et1 si 4200 b

Popcorn Machine: But heater is not working

Mon, 27 Jul 2026 06:19:49 -0700

Warm light turning on. But heater is not working

⟐ Commented июля 27, 2026 at 6:19 GMT-7

Rice Cooker: After cooking is complete, the keep-warm mode does not work.

Sat, 25 Jul 2026 21:24:17 -0700

After cooking is complete, the keep-warm function does not work, causing the rice to spoil quickly.

Panasonic Microwave: model NN-SN966S Lost all control of the keypad exept Reset

Sat, 25 Jul 2026 16:11:45 -0700

First, out of the blue, the display screen showed the Power Level counting down repeatedly (P 10, P 9...) while at the same time the speaker was sending out a continuous beep, beep, beep.

When I unplugged the device for a couple minutes, then plugged the power cable back into the socket, the display came up flashing and showed 88:88. I pressed every button on the keypad and only the Reset button worked clearing the display and showed : and again none of the keys on the keypad worked.

Anyone have any ideas? I'm thinking maybe the keypad failed or possibly the microprocessor. Is this even fixable?

⟐ Commented июля 25, 2026 at 16:11 GMT-7

Keurig Elite: Add water, Heating, and Medium cup buttons flash but no coffee!

Fri, 24 Jul 2026 10:24:35 -0700

I recently moved cities and after unpacking I noticed my Keurig is no longer working. When I turn my Keurig on, the machine will display the add water, heating and medium cup buttons and they will all be blinking. I tried to replace the external water reservoir and even opened up the bottom of the Keurig to drain the internal reservoir however I have not seen any results. If anyone has had a similar problem, please feel free on what to do in order to fix this.

⟐ Commented июля 24, 2026 at 10:24 GMT-7

Braun: Why is my coffeemaker leaking water from the bttom

Thu, 23 Jul 2026 09:57:25 -0700

Water drains from the tank and leaks out the bottom of the machine

⟐ Commented июля 23, 2026 at 9:57 GMT-7

Bodum Bistro Electric water kettle 1.5L: Why is my kettle not functioning when plugged in

Thu, 23 Jul 2026 09:48:59 -0700

It has no smell to show any damage

⟐ Answered июля 23, 2026 at 9:48 GMT-7

Nespresso Delonghi Lattissima Touch: Latissima Touch - Fails to complete the descaling process

Wed, 22 Jul 2026 15:54:12 -0700

Tried to descale the machine (when prompted by the flashing light).

Descaling cycle completed, but after filling the tank with fresh water the machine switched off when the froth button was pressed to start the rinse cycle.

Tried to run the whole process three times - no change.

So can't complete the rinse and the descale light continues to flash.

Any similar experience and suggested fix out there?

⟐ Answered июля 22, 2026 at 15:54 GMT-7