⟐ Answered апреля 02, 2025 at 8:52 GMT-7

⟐ Commented августа 02, 2024 at 20:37 GMT-7

⟐ Answered сентября 20, 2022 at 13:27 GMT-7

⟐ Answer accepted апреля 11, 2022 at 17:51 GMT-7

⟐ Commented апреля 16, 2023 at 21:06 GMT-7

⟐ Answered июня 07, 2020 at 11:16 GMT-7

⟐ Commented марта 05, 2022 at 23:08 GMT-7

⟐ Answered августа 08, 2023 at 5:51 GMT-7

⟐ Answer accepted декабря 06, 2019 at 5:39 GMT-7

⟐ Answered марта 03, 2016 at 15:18 GMT-7

⟐ Reopened декабря 29, 2021 at 11:11 GMT-7

⟐ Answered октября 13, 2015 at 11:58 GMT-7

15v 5.4w 1310/A

⟐ Answer edited февраля 17, 2018 at 13:11 GMT-7

Inspired by an iFix article from the US I decided to take it apart to see if I could replace the batteries. After great difficulty I managed to do this without breaking any of the pieces (although I haven’t put it back together yet!). However, the batteries are unmarked other than with the following:

“SAN

NiMH

8JH”

I’ve search everywhere I can think of online for information and even contacted Philips but they won’t give me the battery specification, they claim it is proprietary data.

I know the batteries are Nickel Metal Hydride and I’m pretty certain they are 2 AA batteries joined together so I think they will be v1.2 each (total 2.4v) but can’t be certain and I’ve no idea of the capacity. I’ve found a few places selling the battery units I need with the metal tabs to solder onto the wires in the beard trimmer but without the specification for the original battery I’m reluctant to risk using any of these.

My battery knowledge is pretty limited but I’m worried that there will be an issue charging replacement batteries with the original charger if the new ones are a different spec.

I separated the original battery unit to see if there was anything written on the joined section that would give me more information but nothing. Each battery has the following dimensions:

Height = 49 mm

Diameter = 13 mm

So the original unit is 26mm wide as the 2 batteries were attached along their lengths.

Does anyone know which batteries I can use? As I said my main concern is the charging of these replacement with the original charger but I also need to know the batteries will power the trimmer.

Any help much appreciated.

Thank you very much,

⟐ Answer accepted июля 16, 2024 at 6:40 GMT-7

⟐ Answered ноября 16, 2023 at 18:23 GMT-7

I have an old Satinelle Ice, which isn't cordless. I believe the wire connection is what is going bad because it works when I use the device in certain angles. Have you come across this model in particular? Just wondering how to fix it. Actually I can't even open it. The screws shown on the transformer are not the typical type, the head has to small indentations but not + cross or the __ continues line. It's more like this - - . The one on the actual device isn't a screw, I know it looks obvious but that is sort of like a "sliding metal door" (best way I can describe) You would think there is a screw behind but none that I can see.

⟐ Edited by author апреля 23, 2023 at 11:12 GMT-7

And the trimmer is making unusual noise and stopping after a few seconds

⟐ Commented августа 30, 2022 at 8:12 GMT-7

⟐ Answered декабря 21, 2020 at 23:52 GMT-7

⟐ Answer edited апреля 09, 2020 at 0:46 GMT-7

Now I just get an orange flashing light when I press the buttons. What's up?

⟐ Answered ноября 11, 2018 at 15:13 GMT-7