<![CDATA[iFixit - Answers With Device "Vacuum Cleaner"]]> https://ru.ifixit.com/Answers/Device/Vacuum_Cleaner/All?rss=yes en-US Fri, 19 Jun 2026 06:59:00 -0700 <![CDATA[Dyson V15: В чем проблема,пылесос работает но не высасывает пыль ,дайсон v 40 ани]]> Пылесос работает но не высасывает пыль,в чем проблема,дайсон v 40 анималь

⟐ Answered марта 07, 2026 at 8:15 GMT-7

]]> https://ru.ifixit.com/Answers/View/943494/%D0%92+%D1%87%D0%B5%D0%BC+%D0%BF%D1%80%D0%BE%D0%B1%D0%BB%D0%B5%D0%BC%D0%B0,%D0%BF%D1%8B%D0%BB%D0%B5%D1%81%D0%BE%D1%81+%D1%80%D0%B0%D0%B1%D0%BE%D1%82%D0%B0%D0%B5%D1%82+%D0%BD%D0%BE+%D0%BD%D0%B5+%D0%B2%D1%8B%D1%81%D0%B0%D1%81%D1%8B%D0%B2%D0%B0%D0%B5%D1%82+%D0%BF%D1%8B%D0%BB%D1%8C+,%D0%B4%D0%B0%D0%B9%D1%81%D0%BE%D0%BD+v+40+%D0%B0%D0%BD%D0%B8 https://ru.ifixit.com/Answers/View/943494 Sat, 07 Mar 2026 08:15:22 -0700 <![CDATA[Other Robotic Vacuum Cleaner: станция не забирает грязную воду с поддона где моются тряпки]]> Робот Roidmi Eva, старенький не знаю как прочистить трубку на станции которая забирает грязную воду с поддона. Трубка идет посеридине у самой задней стенки станции, почти «впол» к ее дне зазор 5 мм, чтобы засасывать грязную воду из-под тряпок робота пылесоса вверх. Пробовала разбирать каркас, и вскрывала его крышку, все равно не понимаю как к ней добраться.

]]> https://ru.ifixit.com/Answers/View/930988/%D1%81%D1%82%D0%B0%D0%BD%D1%86%D0%B8%D1%8F+%D0%BD%D0%B5+%D0%B7%D0%B0%D0%B1%D0%B8%D1%80%D0%B0%D0%B5%D1%82+%D0%B3%D1%80%D1%8F%D0%B7%D0%BD%D1%83%D1%8E+%D0%B2%D0%BE%D0%B4%D1%83+%D1%81+%D0%BF%D0%BE%D0%B4%D0%B4%D0%BE%D0%BD%D0%B0+%D0%B3%D0%B4%D0%B5+%D0%BC%D0%BE%D1%8E%D1%82%D1%81%D1%8F+%D1%82%D1%80%D1%8F%D0%BF%D0%BA%D0%B8 https://ru.ifixit.com/Answers/View/930988 Tue, 16 Dec 2025 01:48:32 -0700 <![CDATA[Tefal X-PLORER SERIE 95: вода не подается при мытье полов]]> судя по всему сломался насос. ранее пытался продувать трубку подачи воды. помогло. теперь не помогает

]]> https://ru.ifixit.com/Answers/View/930208/%D0%B2%D0%BE%D0%B4%D0%B0+%D0%BD%D0%B5+%D0%BF%D0%BE%D0%B4%D0%B0%D0%B5%D1%82%D1%81%D1%8F+%D0%BF%D1%80%D0%B8+%D0%BC%D1%8B%D1%82%D1%8C%D0%B5+%D0%BF%D0%BE%D0%BB%D0%BE%D0%B2 https://ru.ifixit.com/Answers/View/930208 Thu, 11 Dec 2025 08:38:19 -0700 <![CDATA[Vacuum Cleaner: Как почистить пылесос Dyson v 15]]> пылесос требует чистку

⟐ Answered сентября 27, 2025 at 8:54 GMT-7

]]> https://ru.ifixit.com/Answers/View/919160/%D0%9A%D0%B0%D0%BA+%D0%BF%D0%BE%D1%87%D0%B8%D1%81%D1%82%D0%B8%D1%82%D1%8C+%D0%BF%D1%8B%D0%BB%D0%B5%D1%81%D0%BE%D1%81+Dyson+v+15 https://ru.ifixit.com/Answers/View/919160 Sat, 27 Sep 2025 08:54:58 -0700 <![CDATA[Dyson v12: при запуске выключается и так раз 10]]> при запуске пылесос выключается через 3-5 секунд и так раз 10, и только потом начинает работать в штатном режиме

⟐ Answered сентября 03, 2025 at 3:41 GMT-7

]]> https://ru.ifixit.com/Answers/View/900913/%D0%BF%D1%80%D0%B8+%D0%B7%D0%B0%D0%BF%D1%83%D1%81%D0%BA%D0%B5+%D0%B2%D1%8B%D0%BA%D0%BB%D1%8E%D1%87%D0%B0%D0%B5%D1%82%D1%81%D1%8F+%D0%B8+%D1%82%D0%B0%D0%BA+%D1%80%D0%B0%D0%B7+10 https://ru.ifixit.com/Answers/View/900913 Wed, 03 Sep 2025 03:41:32 -0700 <![CDATA[iRobot Roomba i7: крутиться на одном месте не срабатывает кнопка clean с 1 раза]]> долго грузит приложение

]]> https://ru.ifixit.com/Answers/View/866891/%D0%BA%D1%80%D1%83%D1%82%D0%B8%D1%82%D1%8C%D1%81%D1%8F+%D0%BD%D0%B0+%D0%BE%D0%B4%D0%BD%D0%BE%D0%BC+%D0%BC%D0%B5%D1%81%D1%82%D0%B5+%D0%BD%D0%B5+%D1%81%D1%80%D0%B0%D0%B1%D0%B0%D1%82%D1%8B%D0%B2%D0%B0%D0%B5%D1%82+%D0%BA%D0%BD%D0%BE%D0%BF%D0%BA%D0%B0+clean+%D1%81+1+%D1%80%D0%B0%D0%B7%D0%B0 https://ru.ifixit.com/Answers/View/866891 Wed, 28 Aug 2024 05:01:45 -0700 <![CDATA[iRobot Roomba 880: плохо всасывает новый фильтр поставил]]> вздулся конденцатор на базе для зарядки на 400v 47uf

]]> https://ru.ifixit.com/Answers/View/866889/%D0%BF%D0%BB%D0%BE%D1%85%D0%BE+%D0%B2%D1%81%D0%B0%D1%81%D1%8B%D0%B2%D0%B0%D0%B5%D1%82+%D0%BD%D0%BE%D0%B2%D1%8B%D0%B9+%D1%84%D0%B8%D0%BB%D1%8C%D1%82%D1%80+%D0%BF%D0%BE%D1%81%D1%82%D0%B0%D0%B2%D0%B8%D0%BB https://ru.ifixit.com/Answers/View/866889 Wed, 28 Aug 2024 04:53:11 -0700 <![CDATA[iRobot Roomba 800: вращается на одном месте.]]> робот вращается на одном месте ошибку выдает о неисправности левого колеса после его замены ничего не изменилось

⟐ Answered июля 07, 2023 at 3:41 GMT-7

]]> https://ru.ifixit.com/Answers/View/502398/%D0%B2%D1%80%D0%B0%D1%89%D0%B0%D0%B5%D1%82%D1%81%D1%8F+%D0%BD%D0%B0+%D0%BE%D0%B4%D0%BD%D0%BE%D0%BC+%D0%BC%D0%B5%D1%81%D1%82%D0%B5. https://ru.ifixit.com/Answers/View/502398 Fri, 07 Jul 2023 03:41:10 -0700 <![CDATA[Samsung NaviBot SR8855: как отремонтировать робот пилесос]]> пылесос очищен. после включения start на дисплее показывает ошибку C-01, как

устранить неисправность?

Online Translation.

how to repair the robot pilesos

vacuum cleaned. after the start , the display shows an error C- 01 as

troubleshoot ?

⟐ Answered декабря 28, 2021 at 7:09 GMT-7

]]> https://ru.ifixit.com/Answers/View/279309/%D0%BA%D0%B0%D0%BA+%D0%BE%D1%82%D1%80%D0%B5%D0%BC%D0%BE%D0%BD%D1%82%D0%B8%D1%80%D0%BE%D0%B2%D0%B0%D1%82%D1%8C+%D1%80%D0%BE%D0%B1%D0%BE%D1%82+%D0%BF%D0%B8%D0%BB%D0%B5%D1%81%D0%BE%D1%81 https://ru.ifixit.com/Answers/View/279309 Tue, 28 Dec 2021 07:09:02 -0700 <![CDATA[Robotic Vacuum Cleaner: im going crazy help requested]]> i bought this vacuum https://www.amazon.com/dp/B0DR8NJMCJ?ref... ECOVACS DEEBOT X8 PRO OMNI Robot Vacuum 1 year ago.

recently the main brush motor stopped spinning so i opened it up to replace the motor. i have now bought 3 different replacement motors that say they are for the T8 or 8x. but none of them fit correctly. i have searched like crazy but can not for the life of my find my motor anywhere online. (pictures below) am i crazy? are these no longer in production? is one of the other motors supposed to fit even though the L shape is wrong? your wisdom is appreciated.

Block Image
Block Image

Update (06/18/26)

ok so with some inspiration from oldturkey03 i think im close. im going to walk through what i did if anyone else is ballzie enough to try this.

so i decided i was going to transfer the old L drive shaft to the new motor. i started by unclipping the snaps around the perimeter (picture1).

Block Image

once inside i cleaned all the gears as they were very full of dirty grease (picture2).

Block Image

i then removed the two screws on the left side of the image (picture3) (this is where the motor attaches) and screwed in the new motor.

Block Image

but as i put it back together i realized that the gear attached to the new motor was beveled to the left but all the old gears were beveled to the right! so i pried the motor gear off of the old motor and transferred it to the new one. (be careful when prying off it toke a lot of force and mine ended up half way across the room in my white shag carpet. much cussing ensued.)

ive got all the pieces together and clean now i guess the last thing i need is to figure out what kind of lubricant to use on the gears. any ideas?

⟐ Edited by author июня 18, 2026 at 16:20 GMT-7

]]> https://ru.ifixit.com/Answers/View/959813/im+going+crazy+help+requested https://ru.ifixit.com/Answers/View/959813 Thu, 18 Jun 2026 16:20:53 -0700 <![CDATA[Dyson Ball Animal 2 Total Clean: No suction from wand]]> Why is my wand has no suction?

]]> https://ru.ifixit.com/Answers/View/960129/No+suction+from+wand https://ru.ifixit.com/Answers/View/960129 Wed, 17 Jun 2026 13:12:39 -0700 <![CDATA[Proscenic M8PRO: Rotating laser stuck error.]]> Hi. I have a Proscenic M9 vacuum and it keeps saying the laser is stuck or broken. But it is not. I have cleaned the lenses and everything I could. It rotates if I turn it. But if I switch it on it says the same thing over and over and the vacuum rotates in one place. Before it switch off. What can I do to fix this?

]]> https://ru.ifixit.com/Answers/View/960118/Rotating+laser+stuck+error. https://ru.ifixit.com/Answers/View/960118 Wed, 17 Jun 2026 11:55:15 -0700 <![CDATA[Samsung Jet Bot VR30T80313W: Battery won't charge.]]> So I just got my robot vacuum back after lending it to my brother.

Turned out it stopped working a while ago.

When I got it back I started to diagnose it.

The first thing I noticed was, when it's docked in the charginstation, it turns on and I can adopt it into the smart things app. The battery read 0% and no matter how long it charges it wouldn't go up.

So I started by disassembling the battery down to its individual cells. Turned out 5 out if 6 cells were completely dead (absolute 0 volts).

So I ordered some new cells and put the battery back together. The battery now shows 21,7 volts. But it still doesn't want to run outside the chargingstation.

When I use a multimeter on the battery, while it's connected to the chargingstation it shows about 25 volts on d+ to d- (the plugs from the vacuum to the PCB on the battery). And still 21,7 volts on b+ to b- (the spot welded tin to the battery). It has now charged for about 2 hours and it's still about 37% charged (so not getting charged).

I've tried to put the PCB under an thermal camera to see if anything gets hot, but it doesn't. Even with it plugged into the chargingstation, without the chargingstation or it disconnected from the robot. I've also tried to connect 21 volts 1 a with a powersupply connected both on d+ to d- and on b+ to b-, yet nothing gets hot.

Anyone have any idea on how I could fix this?

I'm pretty new to this stuff, but I do watch some youtubers like NorthridgeFix and TronicFix so I have some general idea.

Should I disconnect the cells again and maybe try injecting voltage over some of the chips on the PCB or check the resistance on some of the caps? If so i would love some guidence. I don't have a chip programmer yet, but I will order one sooner or later, if needed.

Image of the PCB here:

https://imgur.com/a/eqJpynu

Block Image

I'm also working on a guide on the disassembly of the batter here (ask and ill add you in order to view):

Disassembling Samsung Vacuum Battery VCA-RBT80 VR30T80313W/WA

⟐ Commented июня 16, 2026 at 3:16 GMT-7

]]> https://ru.ifixit.com/Answers/View/925332/Battery+won't+charge. https://ru.ifixit.com/Answers/View/925332 Tue, 16 Jun 2026 03:16:25 -0700 <![CDATA[Electrolux Vacuum: The suction is very poor. This is an Epic 3500 upright.]]> My Epic 3500 upright is not suctioning well. The roller is rolling on the bottom. I removed the bag and a very old sponge like material was extracted. This is an old vacuum, but has always been superior in working until now.

]]> https://ru.ifixit.com/Answers/View/959808/The+suction+is+very+poor.+This+is+an+Epic+3500+upright. https://ru.ifixit.com/Answers/View/959808 Mon, 15 Jun 2026 11:55:19 -0700 <![CDATA[Shark Wandvac Power Pet WV410BL: Motor is making a loud whirring sound]]> We recently had construction and have been using both our Wandvacs constantly. I clean or change the pullout filters daily yet both seem to be on the fritz since. The WV410CO has a whirring motor and our WV201 keeps going off and on. Can either or both be saved?

⟐ Answer edited июня 14, 2026 at 17:49 GMT-7

]]> https://ru.ifixit.com/Answers/View/959404/Motor+is+making+a+loud+whirring+sound https://ru.ifixit.com/Answers/View/959404 Sun, 14 Jun 2026 17:49:22 -0700 <![CDATA[iRobot Roomba 600: My roomba is not picking up anything the side brush spins but when I s]]> My roomba does not pick up anything the brushes underneath are not spinning

⟐ Marked as duplicate июня 13, 2026 at 22:59 GMT-7

]]> https://ru.ifixit.com/Answers/View/959572/My+roomba+is+not+picking+up+anything+the+side+brush+spins+but+when+I+s https://ru.ifixit.com/Answers/View/959572 Sat, 13 Jun 2026 22:59:19 -0700 <![CDATA[iRobot Roomba 600: Doesn't pick up anything I have cleaned all brushes filter and eyes]]> My roomba does not pick up anything

I have cleaned all parts

⟐ Marked as duplicate июня 13, 2026 at 22:59 GMT-7

]]> https://ru.ifixit.com/Answers/View/959570/Doesn't+pick+up+anything+I+have+cleaned+all+brushes+filter+and+eyes https://ru.ifixit.com/Answers/View/959570 Sat, 13 Jun 2026 22:59:19 -0700 <![CDATA[INSE S6X: Vacuum doesn't start]]> the lights blink with a whistle sound

⟐ Answered июня 13, 2026 at 19:26 GMT-7

]]> https://ru.ifixit.com/Answers/View/959542/Vacuum+doesn't+start https://ru.ifixit.com/Answers/View/959542 Sat, 13 Jun 2026 19:26:41 -0700 <![CDATA[Dyson DC14 All Floors: dyson dc14 soleplate placement]]> how to put a dyson dc14 soleplate back on the vacuum

]]> https://ru.ifixit.com/Answers/View/959536/dyson+dc14+soleplate+placement https://ru.ifixit.com/Answers/View/959536 Sat, 13 Jun 2026 15:36:52 -0700 <![CDATA[Dyson v6 Absolute: How do I snap the canister lid back on it fell off]]> How to replace canister lid on my Dyson V6 it looks like it snaps back in but it's hard and don't want to break it

⟐ Commented июня 10, 2026 at 11:29 GMT-7

]]> https://ru.ifixit.com/Answers/View/377281/How+do+I+snap+the+canister+lid+back+on+it+fell+off https://ru.ifixit.com/Answers/View/377281 Wed, 10 Jun 2026 11:29:54 -0700