iFixit - Answers With Device "Xbox One Controller"

Xbox One Elite Wireless Controller Series 2: не заряжается геймпад напрямую от кабеля

Sat, 28 Feb 2026 10:04:56 -0700

после разбора и чистки геймпад перестал заряжаться.

при подключении кабеля геймпад работает, но батарея не заряжается, проверял батарею на исправность, батарея в норме, подключал провода напрямую и батарея заряжалась , в чем может быть проблема ?

Xbox One Wireless Controller Model 1708: What battery pack do I use for this?

Mon, 20 Jul 2026 22:11:32 -0700

I just got this remote and I have bought the wrong battery pack...it's to big to fit. What V do I look for l, to have it work for my remote. The one I bought was 3600. It said I was for Xbox one controller and it doesn't fit. Can you help me?

⟐ Commented июля 20, 2026 at 22:11 GMT-7

Xbox Series X Wireless Controller: Help, my controller doesn't stay connected wired

Sat, 18 Jul 2026 10:28:51 -0700

My Xbox Series X controller (Model #1914) seems to have a loose usb c connection since whenever I connect it via a wire it ends up disconnecting a lot. However, when I manage to get it charged (again cuz of the poor wired connection) and connect it to my pc via Bluetooth it works flawlessly.

How could I reasonably fix this issue without soldering if possible?

⟐ Commented июля 18, 2026 at 10:28 GMT-7

Xbox One Elite Wireless Controller Series 2: Non-responsive with battery connected

Tue, 14 Jul 2026 05:13:50 -0700

Have a strange issue. My elite 2 controller is completely non-responsive when the battery is connected. Won't power on, charge, or anything. BUT it works when plugged in via usb without the battery connected. As soon as I reassemble the back plate and connect the battery, the controller is completely dead.

Useful diagnostic info:

battery is delivering power and not damaged
no liquid damage to controller
no visible corrosion on battery connectors

What is going on????

⟐ Answered июля 14, 2026 at 5:13 GMT-7

Xbox One Wireless Controller Model 1537: Controller won't turn on with batteries.

Sun, 21 Jun 2026 14:07:47 -0700

Hi, I have recently taken my Xbox One Controller apart to replace the ABXY rubber mat and when I put it back together it won't turn on. I can hold the home button down and it'll turn on but once I release the button it will turn off. Also, I can plug the USB cable from the console into the controller and it works perfectly. If anyone has any answers to why I won't work properly with batteries I would be grateful.

⟐ Answered июня 21, 2026 at 14:07 GMT-7

Xbox One Wireless Controller Model 1708: Where to find a replacement LB RB for a cyberpunk controller

Tue, 16 Jun 2026 22:24:50 -0700

Im looking for a replacement LB RB for my limited edition cyberpunk controller. It took a tumble off of a shelf and I wanted to keep that in my own personal collection. If I have to ill replace it with just a all grey or all red one but I was trying to find that exact split color one. Hopefully someone can point me in the right direction

⟐ Answered июня 16, 2026 at 22:24 GMT-7

Xbox Series X Wireless Controller: Power Issues overheating, and coil whine

Sun, 14 Jun 2026 22:04:57 -0700

I did a stick swap recently and now the controller has an awful whine sound near the xbox button, and the xbox buttons light is extremely dim. When in wireless mode, if it decides to work, there is no power light and the vibration motors don't work. Also the D-pad gets hot after a couple of minutes. My best guess is that because that is where the processor is it could be overheating. It seems like overall some weird stuff is going on with power delivery but I can not seem to figure out what I did to cause this.

Would love some feedback and help.

⟐ Commented июня 14, 2026 at 22:04 GMT-7

Xbox One Elite Wireless Controller Series 2: Xbox Series X Gulikit TMR Joystick compatibility with Elite controller

Thu, 11 Jun 2026 01:56:34 -0700

This question is regarding the warning about compatibility of the Gulikit TMR Joystick with the Xbox Elite series controllers. There is a warning stating "Not recommended for Xbox Elite or Xbox One controllers due to unavailable software for joystick calibration." This doesn't make any sense because the Elite controllers actually use the Xbox Accessories app that has built in joystick calibration software. The very same software I see being used to calibrate the joysticks for the regular Xbox non-Elite version controllers.

I'm assuming the actual issue of compatibility is the different style of stem that has a thread to screw the Elite series thumbstick cover on. If that is the case, then my second question is if it is possible to replace the stem of the Gulikit thumbstick with the stems from Elite thumbsticks or not? I would really like to be able to replace the thumbsticks with TMR type if possible. The product page states that lack of calibration software is the issue, but I believe that is incorrect and the real problem is the stem difference. I would appreciate any feedback from anyone that has attempted this or knows enough about the TMR joysticks to know if they can be modified to fit the Elite 2. Thanks.

⟐ Commented июня 11, 2026 at 1:56 GMT-7

Xbox One Wireless Controller Model 1537: My controller constantly wants to keep moving up

Tue, 09 Jun 2026 04:45:31 -0700

When I turn on my Xbox the controller wants to move up the screen constantly and wont stop its a struggle to try to scroll down on anything or play a game.

⟐ Commented июня 09, 2026 at 4:45 GMT-7

Xbox Series X Wireless Controller: Possible to replace stock joystick with Elite ones?

Thu, 04 Jun 2026 06:57:07 -0700

I noticed that the Series and Elite controllers seems to have similar joystick solder pad locations...

I would really like the tension adjustments available in the Elite controller but don't want to buy another since I already own 3 controllers. Would it be possible to swap the Elite joysticks onto the Series controller if the position of the solder pads are the same? It doesn't matter if it won't fit inside the casing, I can simply cut part of the casing to make the tension adjustment joysticks fit, but the main question is whether the joystick are interchangeable. It's hard to tell the exact location in only the pictures and I don't know whether the wipers are identical.

Can anyone who happens to have both the Series and Elite controller or know about the joysticks tell me whether they are interchangeable? I know it's a pretty crazy mod, but it sounds pretty plausible to me.

Thanks in advance!

⟐ Commented июня 04, 2026 at 6:57 GMT-7

Xbox One Elite Wireless Controller Series 2: My rubber grip is coming away...

Sat, 30 May 2026 17:41:16 -0700

Is there a way to reseat / realign the rubber handgrip on a Xbox Elite Series 2 controller??

⟐ Commented мая 30, 2026 at 17:41 GMT-7

Xbox One Elite Wireless Controller Series 2: My charging port doesn’t work

Thu, 21 May 2026 03:05:02 -0700

For some reason my charging port quit working today. I plugged it into my Xbox one a few hours ago and it worked fine. It seems to not register a cable at all, I tried the official cable and my other cable that worked before on my series S as well. Any tips?

⟐ Commented мая 21, 2026 at 3:05 GMT-7

Xbox One Wireless Controller Model 1708: Joystick only moves left right and up after replacement

Wed, 20 May 2026 07:14:25 -0700

⟐ Commented мая 20, 2026 at 7:14 GMT-7

Xbox Series X Wireless Controller: hi can anybody help?

Wed, 13 May 2026 10:07:21 -0700

I bought this used Xbox controller, and I think it has stick drift. Does anyone know if it could just be a simple software issue, or will I have to replace the whole joystick?

Right joy stick gets stuck rising from 20% to 70% up, then when you use the stick it resets and rises again. I would send a video but I don’t know how.

⟐ Answer unaccepted мая 13, 2026 at 10:07 GMT-7

Xbox One Wireless Controller Model 1708: How to remove Broken headphone piece out of controller

Fri, 01 May 2026 08:25:44 -0700

So I was using a pair of gaming headphones and my arm got caught in the wire and pulled away and broke the end of the cable in the controller. So I spent $30 on the gripstick to remove it, but all it did was push it in further. Please help. Are there possible refunds for the GripStick? Also, it wasn’t just the tip that broke off. It was a decent chunk of the headphone jack that is now lodged in even more thanks to the GripStick.

⟐ Answered мая 01, 2026 at 8:25 GMT-7

Xbox One Wireless Controller Model 1708: Why wont my Controller stay connected? to any device Pc, phone

Fri, 01 May 2026 04:38:58 -0700

Soo, on this model of my xbox controller im having a weird connectivity issue
ive had this controller for i assume 3 years or more
both of these controllers first work just fine connecting to my pc (cachy os, gnome), i play my game , but after like lets say 10 minutes, it just locks onto one input like going up left, and nothing else, none of my inputs do anything, its been bothering me

⟐ Commented мая 01, 2026 at 4:38 GMT-7

Xbox One Controller: Joysticks jumps around after replacements

Fri, 24 Apr 2026 12:18:04 -0700

I've replaced joysticks on two controllers now and ran into the same issue both times.

Simply put, the joysticks wobble around from one direction to the other constantly, and one stick won't work aside from the LS click. All solder connections are working(checked continuity), no burnt off pads and no bridges as far as I can see.

In the first controller, i swapped one stick and it caused this on both. On the new one. I swapped both and both are affected, but one stick doesn't work at all.

LS is a third party replacement stick and doesn't react to movement. Jumps from left up to right down.

RS is a harvested stick from a broken controller and reacts to movement, but jumps from left to right.

⟐ Answered апреля 24, 2026 at 12:18 GMT-7

Xbox Series X Wireless Controller: Right trigger replacement maybe

Thu, 09 Apr 2026 15:53:16 -0700

right trigger doesn't work which makes sense because the circular magnet looking thing is broken off and lost. How should I fix it?

⟐ Commented апреля 09, 2026 at 15:53 GMT-7

Xbox Series X Wireless Controller: My controller is recognized in windows but the led doesnt turn on.

Wed, 01 Apr 2026 14:02:50 -0700

My Xbox controller, which I was installing TMR sticks as soon as I finished installing the sticks, the controller gets connected, and Windows recognizes it as wireless_device, but it doesn't work at all. I installed the right stick first. I tested it and calibrated, and it worked fine, but as soon as I finished the left stick, the controller got recognized, but the LED indicator didn't turn on, and there was no input. The traces were all perfect, and no missing components. Is it the TMR's fault?. I will try desoldering it later, but I want answers, please!!!. thanks.

Update: At a certain point when I barely connect the two boards together it shows the led and if I kinda move even so slightly it stops. And I hear this buzzing noise very low from the controller

⟐ Commented апреля 01, 2026 at 14:02 GMT-7

Xbox Series X Wireless Controller: Only works when plugged in

Wed, 01 Apr 2026 03:47:11 -0700

Whats the fix?

⟐ Commented апреля 01, 2026 at 3:47 GMT-7