⟐ Answered марта 28, 2024 at 0:57 GMT-7

hdd -> ssd

cpu i5 6500 -> i7 6700k

после замены iMac не включается либо включается и кулер работает на полную мощность

Сброс SMC не помог

⟐ Answered января 13, 2023 at 4:16 GMT-7

Но!

Покупать у Apple очень дорого, использовать переходники не очень хочется.

Transcend производит такие накопители (JetDrive 820, 825, 850, 855).

Внешне они похожи на blade ssd, количество контактов абсолютно одинаковое.

Но по непонятным причинам Transcend про поддержку iMac ничего не говорит.

Пожалуйста, дайте ответ на самый главный вопрос: если я куплю pci-e ssd JetDrive 820, 825, 850, 855, он ПОДОЙДЁТ или НЕТ?

Hello. Please help me finally understand the choice of pci-e ssd. I'm ready to disassemble the iMac and replace it.

But!

It's very expensive to buy from Apple, it's not very desirable to use adapters.

Transcend produces such drives (JetDrive 820, 825, 850, 855).

Outwardly they look like a blade ssd, the number of contacts is exactly the same.

But for some reason, Transcend does not say anything about iMac support.

Please answer the most important question: if I buy a pci-e ssd JetDrive 820, 825, 850, 855, will it PICK or NOT?

⟐ Commented сентября 30, 2020 at 6:39 GMT-7

в связи с этим я решил заменить матрицу на новую но появилось два вопроса:

- существуют ли в принципе оригинальные матрицы и как их отличить от подделок?

- не появится ли пыль при установке новой матрицы?

для меня это важные вопросы, поскольку занимаюсь цветокоррекцией - для меня крайне важно правильное отображение цветов, и отсутствие пыли на экране.

заранее - спасибо!

⟐ Answered января 18, 2018 at 12:12 GMT-7

⟐ Commented февраля 15, 2017 at 5:37 GMT-7

Google Translation

whether it is possible Russification iMac G4

please help , russify iMac G4 OS X 10.1.2 processor PowerPC G4

⟐ Answer accepted августа 16, 2016 at 4:23 GMT-7

добрый день! у меня такая проблема! монитор не фиксируется и как бы я его не старался поднять вверх он автоматом опускается вниз до конца! стоит на родной подставке "ноге"!

подскажите как можно исправить?

и если это сервис будут ли снимать экран чтоб внутри делать крепление?

English: Stand is not staying in the right position!

Good afternoon! I have a problem! Monitor is not fixed, as if I had not tried to raise up it automatically drops down to the end! stands at home base "leg"!

Can you tell me how can I fix it?

And if I need to remove the screen to get inside to the mount?

⟐ Answer accepted июня 29, 2015 at 4:02 GMT-7

So i have late 2013 27 inch iMac. The fan stopped spinning. I installed TG Pro and sure enough it was showing 0rpm.

So i bought a new fan and followed iFixit guide to install it but even the new fan is not working.

What could be the issue here?

I read somewhere that cold solder on fan controller(?) might be the issue. I have attached the image below of the fan connector area. Can anyone help me point out what i could do to fix this without having to go to Apple?

Apple HT shows “there maybe a problem with fan PPF003“

⟐ Commented июля 30, 2026 at 23:53 GMT-7

⟐ Answer edited июля 29, 2026 at 19:22 GMT-7

⟐ Answer accepted июля 28, 2026 at 7:50 GMT-7

I have everything you need (or so I think) to use my imac lcd panel (panel LM240WU2 ( SL) ( B4 ) ) as a monitor for other pc

http://i62.tinypic.com/112e876.jpg

http://i61.tinypic.com/2mwxct2.jpg

also I connect the cable from the inverter to the lcd

this http://i59.tinypic.com/f10dts.jpg to http://i57.tinypic.com/f2itxd.jpg

Connect the power cord from the iMac ( white ) energy to the panel. and I connect the power adapter to the board vga 12V 2A

but does not work , connect via a PC to give vga video signal and does not work

do I wrong ?

Help please :(

⟐ Answer edited июля 25, 2026 at 5:17 GMT-7

⟐ Commented июля 24, 2026 at 12:23 GMT-7

I have now created a flash drive with Mac OS El Capitan on it, but when I start the machine and hold down Alt on my keyboard, it boots straight into Mint and does not let me select the installer USB.

Any idea what's going on?

⟐ Answered июля 24, 2026 at 10:34 GMT-7

⟐ Answered июля 20, 2026 at 16:54 GMT-7

It’s not the display or the cable as I’ve tried both on another iMac 5K.

I’ve seen this (the logic board connector) referred to as a LVDS or a special eDP connector.

*Where can I buy this? And can I find someone to solder/replace it for me?

I’ve also tried reseating the cables with no luck. Is there something else I could try?

It’s one of the i7 models with m395x. I’d hate to junk it.

⟐ Commented июля 13, 2026 at 11:39 GMT-7

⟐ Commented июля 10, 2026 at 6:49 GMT-7

⟐ Commented июля 09, 2026 at 11:04 GMT-7

⟐ Answer edited июля 05, 2026 at 3:18 GMT-7

I have an iMac 2009, 21,5" which has been working well until last week. First there was some flickering and sometimes a black display. Since yesterday the display seems not to work anymore.

I have found the apple technicians guide for this iMac online and tried some of the solutions described there. I did a SMC/PVRAM Reset, but this did not solve the problem.

To determine if it's the gpu I connected an external monitor -> everyhing working fine on the external monitor.

It seems that the LED backlight isn't working anymore, because if you use a flashlight you can see everything on the internal screen.

I asked at a local repair store but they told me (without looking at the device...) that it was either the LCD panel, which would cost almost 500€/650$ to replace or the SATA/Board (Logic board?) which would even be more expensive.

My question is whether it's possible to determine if it is the logic board, ta cable connection, the Backlight controller or the LCD-Panel.

Thanks fpr your answers,

Max

⟐ Commented июня 27, 2026 at 12:28 GMT-7