- It will restart around every 3 minutes.
- When pressure is applied on the screen area above the charging port, the battery indicator returns to normal and the crashing halts.

- When pressure has been applied on that area of the screen for a while, it will stay alive for much longer than 3 minutes (it lasted an hour last night).


I do intend on taking it to the repair shop ASAP but could anyone potentially tell me what the problem is?


"panicString" : "panic(cpu 0 caller 0xfffffe00109bdf40): SMC PANIC - ASSERTION FAILED: target\/j61x\/target.cpp:365: 0, SMC BSC failure, spreadsheet ver(*10) 351801\nS.sensor array 0 - 6 is 0x5b, 0x2000, 0x0, 0x0, 0x0, 0x0, 0x0\n\n - Misc(2) OUTBOX2 not ready\nASSERTION FAILED: target\/j61x\/target.cpp:365: 0, SMC BSC failure, spreadsheet ver(*10) 351801\nS.sensor array 0 - 6 is 0x5b, 0x2000, 0x0, 0x0, 0x0, 0x0, 0x0\n\n\nRTKit: RTKit-2413.60.9.release - Client:

This is a snippet of the panic full crash log.

⟐ Answered августа 28, 2025 at 8:17 GMT-7

⟐ Answered июля 29, 2021 at 18:46 GMT-7

There was a tiny tiny spark and so we figured the worst which was correct. We assembled everything back together and behold the touch screen didn’t work. The iPad powers up and the screen will turn on but you can’t do anything.

My question is, is there a component that I can purchase to replace whatever we fried to get the touch screen working or did we just ruin this iPad beyond repair.

I purchased it from a friend for 150 dollars because it had a cracked screen. The I purchased the new screen for 200 dollars. So I’m 350 dollars invested. Just trying to figure if it’s salvagable or I’m out on my money.

⟐ Commented мая 08, 2026 at 16:27 GMT-7

⟐ Answered ноября 06, 2024 at 15:45 GMT-7

⟐ Answer accepted июля 06, 2024 at 10:21 GMT-7

Im trying to figure out what is causing this issue. The IPad stucks in a black screen, showing the battery icon (without the power cord) when I press the button to turn it on. This all happened after a screen replacement. I thought it could be the battery connector (which was replaced) causing the IPad to not charge, but it seems to be fine. I checked the resistance between each pin of the connector and the logic board and theyre all below 1 Ohm. So my next step would be checking if the battery is dead or if a part on the logic board is missing. Does anyone have some advices for me? Can anyone tell me if there is something wrong or missing in the pictures below referring to the logic board? That would help a lot.
Thanks in advance.

Some additional pictures from the usb c connector

Does anyone know if some components are missing here or is this the usual case on these logic boards?

⟐ Answer accepted апреля 25, 2023 at 9:30 GMT-7

I was wondering if you guys would know how to manually put power to the mini LED backlights, so I can still use it for something.

⟐ Answered августа 24, 2021 at 6:22 GMT-7

The ipad pro 12.9”(1st gen) It wasn’t used for over a year. When booting it up after that period, the apple logo appears and disappears a couple seconds after it. This goes on and on. But it will only work when the ipad is charging.

What I tried:

• Charged for 45min on charger
• Hard reset, with no luck.
• Putting the ipad in recovery mode, the itunes logo appears, stays on, but when I want to connect it to the pc it instantly shuts of the display. Pc can’t charge the ipad.

Might this be a battery problem? That the battery can’t hold it’s charge when charging. So the battery is ‘empty’. And there is not enough power to boot it up when connected to the charger?

Thanks in advance!

Nick

⟐ Commented сентября 14, 2020 at 12:03 GMT-7

⟐ Commented февраля 24, 2024 at 17:32 GMT-7

any ideas would be greatly appreciated

⟐ Commented ноября 25, 2021 at 13:45 GMT-7

⟐ Commented марта 04, 2025 at 8:25 GMT-7

Is there a part available anywhere for the rear shell?

⟐ Answered апреля 02, 2023 at 8:08 GMT-7

⟐ Answered января 11, 2021 at 12:54 GMT-7

⟐ Answered марта 02, 2025 at 15:45 GMT-7

Any easy fix or resolutions for this? My guess is it’s related to the white spot pressure point?

⟐ Answered февраля 19, 2024 at 13:40 GMT-7

• Any iPad Pro or
• M1 iPad Air or
• iPad 9th gen (WiFi only variants of all).

Why? I got into medical school after lots of effort and a 1-year gap; now, my bad habits are catching up and I need to strike a balance - like my life depends on it.

My !!%@ addiction is under control, thanks to on-campus counseling, but I want to remove triggers and associate iPad to studying only.
In other words: make sure iPad can only be used for note-taking and reading (it is okay to use my desktop in my private room to do other stuff).

Also, once-a-week I'd like to sync notes and PDFs to my desktop and to cloud. I hope that's possible via USB cables.

Please advise whether, and which model, removal of WiFi antenna is possible.

⟐ Answered июня 17, 2023 at 3:30 GMT-7

The update did a hard reset, I could download diagnostic as battery life was to low, It said the Device is in excellent condition and can’t explain whats happen and its out of warranty so cannot be replaced.

⟐ Commented октября 06, 2019 at 21:31 GMT-7

I'm looking for a particular screen protector for my iPad Pro 9.7. On Amazon I see that particular screen protector for the iPad Air / Air 2, but not for iPad Pro 9.7.

The specs show the displays of the two iPads having the same dimensions, but I'm wondering if the layout for the home button and front-facing camera are the same, so that the cutouts will match up exactly.

⟐ Commented декабря 31, 2018 at 13:15 GMT-7

⟐ Commented мая 12, 2026 at 17:29 GMT-7

⟐ Commented июня 15, 2025 at 8:33 GMT-7