iFixit - Answers With Device "iPhone 6s"

iPhone 6s: Will 6s camera connection work on a 6 plus?

Fri, 21 Sep 2018 09:46:38 -0700

I have a bad 6s and would like to take the camera assembly out and just plug it in my 6 plus, will they interchange?

Thanks

⟐ Commented сентября 21, 2018 at 9:46 GMT-7

iPhone 6s: screen is not turning on after screen replacement

Sat, 10 Feb 2018 06:14:33 -0700

I replaced the iPhone 6s screen according to the instructions online and when I connected the cables for the screen to the phone and completed reassembling the phone, the screen will not turn on. It remains black even though the phone will vibrate if I flip the vibrate key. I tried hard resetting the phone by pushing the home button and the screen lock button at the same time and this did not help. Do you have any suggestions for why this could be happening. If not I want to return the screen as it may be the problem.

⟐ Commented февраля 10, 2018 at 6:14 GMT-7

iPhone 6s: iPhone 6s Crackling Microphone. No issues on speaker.

Thu, 04 Jan 2018 05:13:06 -0700

Hi there,

I've had 2 iPhone 6S recently with the exact same problem. When speaking to someone, the microphone sounds very crackly. When they use headphones the sound is clear.

I've done the basics such as replace the charging port. Clean the bottom speaker holes. I changed the camera up top in case it was the proximity sensor.

Has anyone experienced this?

Thanks

In an interesting turn of events. After trying a 2nd new charging port it solved the issue.

To clarify:

- Phone presents with microphone issue

- Replaced charging port still has exact same microphone issue

- Replaced the charging port again and it solved the issue.

⟐ Commented января 04, 2018 at 5:13 GMT-7

iPhone 6s: Ambient light sensor not working

Fri, 24 Nov 2017 03:37:28 -0700

I purchased and installed an ifixit screen for my iPhone 6s, and the 3D Touch feature was so sensitive you couldn't use it, and the auto brightness would not work. If you set the brightness and locked the phone, it came back on at medium brightness every time. I received a replacement screen, and the 3D Touch works great, but the ambient light sensor is still not working. Same issue with the brightness returning at 50% regardless of where you set it. I got the screen and digitizer as an assembly so the accessories (other than the home button) were already installed. All other features including the proximity sensor and front camera work fine. Help!

⟐ Commented ноября 24, 2017 at 3:37 GMT-7

iPhone 6s: Will this phone turn on without a battery plugged in?

Mon, 11 Sep 2023 21:43:50 -0700

Will the phone turn on and show a display while only being plugged into a computer or wall socket?

i have been doing a housing mod and broke the battery connector, after putting the phone back together and plugging it in, it wont turn on and i need to know if its the battery not being plugged in or i have &&^&@@ something else up

⟐ Commented сентября 11, 2023 at 21:43 GMT-7

iPhone 6s: iPhone 6S Tristar IC Replacement Tips

Wed, 15 Mar 2023 04:32:10 -0700

Hi everyone,

My girlfriend iPhone 6S is not charging, and for what I have searched the problem is related with the Tristar IC (U4500).

I already bought the U4500 component and I have all the material necessary form the replacement.

For what I have searched about the problem that I mentioned, the only thing that I need to do is to replace this Tristar IC (U4500) (but if I’m wrong, I appreciate if anyone cloud clarify me, on other possible reasons for this problem).

With that said I have a few questions that I would like to know the answers before try anything with the iPhone.

What temperature should the soldier station be, to remove to Tristar IC, without cause unwanted damage to other components?
How much flux should I apply to avoid damaging other components?
In the removing process how long (seconds or minutes), should I inflict heat to remove the IC chip (an approximated time)?
When heating, my movements should be circular around the spot, or as steady as possible focusing on IC?

Thanks in advance for the help.

⟐ Answer edited марта 15, 2023 at 4:32 GMT-7

iPhone 6s: iPhone 6s will not accept calls

Fri, 27 May 2022 12:07:18 -0700

My wife's iPhone 6s cannot accept calls. The phone can call out but any attempt to reach the phone results in an engaged signal. She made a call this morning but could not terminate the call, there was no red button to end the call. This call does not appear on the call history. .She has done a complete reset back to factory settings.

⟐ Answered мая 27, 2022 at 12:07 GMT-7

iPhone 6s: iPhone 6s short on PP_1V0_SMPS3 , do I inject 1 volt on this line

Sat, 20 Nov 2021 14:51:56 -0700

Hi all , , i've got an iphone 6s here which i was told had been water damaged , having taken it apart it has obviously had a repair attempted already as the shields were off and under fill dug away , the board looks relatively clean with no signs of corrosion there are however some components missing , i think whoever took the under fill off was a bit heavy handed , as FL3202-1 was missing , i believe this is a filter on the vcc main to camera .. am i right in thinking the phone should still boot without this ?

The phone will not boot nor is it seen by itunes

I have checked voltages around tristar , PP_VCC_MAIN is present, so is PP3V0_TRISTAR . and PP1V8 and PP5V0_USB , I replaced tristar to rule it out , still no change

My bench ps reads 15 ma draw which changes to 27 Ma when prompted to boot .. charger current reads 43 ma .

Nothing seemed to be getting warm on the board so i started checking randomly for shorted components , i found line PP_1V0_SMPS3 is shorted to ground , from what i can see there are only 3 components on this line and points under U_BB_RF ,

should i inject 1 v from my ps into this line to see what gets hot ?

⟐ Answered ноября 20, 2021 at 14:51 GMT-7

iPhone 6s: iFixit Screw Maps for iPhone 6S

Sun, 19 Sep 2021 05:49:39 -0700

I was thinking of buying the iFixit tray but I realised that the screw maps were outdated and was wondering if there was someone that found another 3rd party screw map

⟐ Answered сентября 19, 2021 at 5:49 GMT-7

iPhone 6s: will logic board from iPhone 6 work on 6s?

Wed, 16 Dec 2020 14:28:20 -0700

i have an iphone 6s that is icloud lock i was looking into replacing the logic board, i was just wondering if i could replace it with the logic board in my iphone 6

⟐ Answer deleted декабря 16, 2020 at 14:28 GMT-7

iPhone 6s: Can’t answer incoming calls

Fri, 24 Apr 2020 08:45:29 -0700

Have a weird one have an iPhone 6s works great but when a call comes in screen stops working can’t answer and phone will continue to ring until I do a hard reset. I have taken it apart and cleaned it no water damage have replaced the screen install a new battery.

⟐ Commented апреля 24, 2020 at 8:45 GMT-7

iPhone 6s: Why wont my phone get any reception? its stuck on serching

Tue, 04 Feb 2020 10:19:06 -0700

my phone has had no replacements over its use and all of a sudden the call quality has just gotten worse and worse. now the phone is stuck on searching no matter what I do to it. i have tried using a new sim card as well but that didn’t work either.

⟐ Commented февраля 04, 2020 at 10:19 GMT-7

iPhone 6s: No Battery Health Stats

Tue, 26 Nov 2019 19:46:27 -0700

After installing the replacement battery the battery health stats do not populate. Prior to ordering the replacement it was clear the original battery was done for. So I order the replacement and everything went fairly smooth. Let the battery drain (below 10% as I got the pop up alert). I think proceeded to charge the battery to 100% uninterrupted.

My problem - battery health still reads the status service. Even after doing a full reset on the phone it still says service. With exception to one random reboot the phone is running fine. A third party app seems to confirm the battery capacity is going to a full charge. So as far as I can tell everything should be fine. It did seem like the phone got warmer then I’m used to with the new battery, but then it was always in a case.

Any clue why apples Battery Health reading would say I need to service the battery still? Is there an extra step for reseting that?

⟐ Answered ноября 26, 2019 at 19:46 GMT-7

iPhone 6s: Home button not working after screen replacement

Sun, 20 Oct 2019 20:50:38 -0700

Hi, so I know this is a commonly asked question, but I can’t find anything like my situation. I got a replacement 6s screen a while ago, installed it fine, didn’t rip any cables or anything, the only thing I noticed was that the home button was really loose and would shift around a lot. I reconnected everything correctly, but I didn’t snap in the clips holding the screen down because I wanted to make sure it worked. The LCD issues were fixed, but the home button was very finicky and would only work about half the time or when I held it down for a few seconds. After trying it for a while it just stopped responding at all. I disconnected the battery, digitizer cables, etc. to make sure everything was good, and it seemed totally normal. Now I don’t know what to do. Please help me out, thanks. I never had Touch ID enabled so I don’t know if that works.

⟐ Commented октября 20, 2019 at 20:50 GMT-7

iPhone 6s: Motherboard components change help?

Sun, 06 Oct 2019 19:09:29 -0700

Im looking at changing the following chips between two matching iPhone 6s.CPU chip, Qualcomm baseband ic, nand memory chip, my question is after getting them both finished will i need programming tools? For each chip? When i first researched this it looks like you can just switch them and turn them on. Now I'm being told differently. Also I was just told I'm missing a piece. Yes this is for refurb of phones with iCloud activation lock. Clean imei not stolen

⟐ Answer accepted октября 06, 2019 at 19:09 GMT-7

iPhone 6s: trying to replace battery but the screen seems to be too hard to remov

Wed, 15 May 2019 06:22:21 -0700

i have tried using a suction cup while using a sharp object to pry them, but the screen just wont come off (it is not cracked)

⟐ Answer accepted мая 15, 2019 at 6:22 GMT-7

iPhone 6s: iPhone 6S half backlight need solution

Tue, 19 Mar 2019 00:26:53 -0700

I got device which was having no backlight at all , after diagnosis I found the filter capacitor was Burnt instead of changing the capacitor with new one , I did direct jumper , this cause backlight came but the half side of lcd , how to get other half backlight of iPhone 6S

should I put the capacitor on , or change the backlight ic ?

Please share the solution I and Save the phone , as this is my first quation to the forum , please guide me, thank you .

⟐ Commented марта 19, 2019 at 0:26 GMT-7

iPhone 6s: your battery replacement kit has the battery adhesive and the cutter

Tue, 19 Feb 2019 14:12:14 -0700

I don't see the battery adhesive in your kit and I don't see the cutter for the adhesive seal? I need to buy one immediately but I need your answer before.

Thank You

⟐ Answer accepted февраля 19, 2019 at 14:12 GMT-7

iPhone 6s: iPhone Randomly shutdowns after battery replacement.

Fri, 15 Feb 2019 05:29:02 -0700

Hello,

I replaced my iPhone battery at a third-party service center, and since then the phone randomly shutdowns at any percentage (100%, 80%, 50%, 20%), It once shutdown when plugged in to the charger!.

It shutdown suddenly(suddenly goes black) and also won't turn on again unless plugged to the charger.

I returned to the service center and they had no clue but they did replace my battery with a new one once more. The battery loadcycles are 1, and it's wear level is 0%.

Also the date and clock are preserved after turning the device on again(they don't reset).

What could be the cause of this ?

⟐ Answered февраля 15, 2019 at 5:29 GMT-7

iPhone 6s: iPhone most third party apps not working

Thu, 14 Feb 2019 06:08:49 -0700

Suddenly in morning my all shopping apps , music apps etc stopped working they were showing there is no internet on mobile data while my whatsapp YouTube Facebook were working fine on mobile data . These stopped apps were only working on Wifi . I tried everything reset , restore backup but still same problem while my another iPhone 6s same network same area is working fine ?

please help

⟐ Answered февраля 14, 2019 at 6:08 GMT-7