Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Помощь

Текущая версия: Adam Smith ,

Название:

Damaged display power header whilst replacing hard disk drive

Текст:

I've damaged the display power header pins on the logic board whilst replacing the hard disk drive, snapping one of the pins off (far right pin as you look at the header).

This is the header physically on the logic board and not the cable that plugs in to it. Neither is it the display data header/cable. The cable has a black plastic end to it and slots onto 6 metal pins: http://www.macpartsonline.com/922-9849-cable-displayport-power-27-inch-imac-mid-2011-a1312.html

Is it possible to get hold of the relevant header to replace via soldering, or am I resigned to a new logic board? If a new logic board is required can I use any 2011 logic board or is there a specific one for this machine?

Устройство:

iMac Intel 27" EMC 2429

Статус:

open

Принятый ответ:

123690

Оригинальный сообщение: Adam Smith ,

Название:

Damaged display power header whilst replacing hard disk drive

Текст:

I've damaged the display power header pins on the logic board whilst replacing the hard disk drive, snapping one of the pins off (far right pin as you look at the header).

This is the header physically on the logic board and not the cable that plugs in to it. Neither is it the display data header/cable. The cable has a black plastic end to it and slots onto 6 metal pins: http://www.macpartsonline.com/922-9849-cable-displayport-power-27-inch-imac-mid-2011-a1312.html

Is it possible to get hold of the relevant header to replace via soldering, or am I resigned to a new logic board? If a new logic board is required can I use any 2011 logic board or is there a specific one for this machine?

Устройство:

iMac Intel 27" EMC 2429

Статус:

open