Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Помощь

Текущая версия: bac ,

Текст:

I don't have a service manual for you, however I've taken apart my Powershot S500 several times, including opening the lens/sensor assembly to successfully clean dust on the sensor.
 
I documented it in [guide|1261|this teardown report] here on ifixit. From other Powershot cameras I have seen and poked around with, the construction of others is very similar so even if you're wanting to do this with a different model, you may find my photos instructive.
 
I also notice there are some additional repair[[Family:Canon_Camera|repair guides for other modelsCanon models]] here on ifixit now - take a look at those also.
I also notice there are some additional repair[[Family:Canon_Camera|repair guides for other modelsCanon models]] here on ifixit now - take a look at those also.
 
if you are handy with taking apart things and handling tiny screws and delicate ribbon cables, you may be able to take apart your camera without a service manual. basically just take it apart one screw at a time, save and label where the screws go, and perhaps take photos along the way (that's how my teardown photos came about). then reverse the process when done. good luck!

Статус:

open

Оригинальный сообщение: bac ,

Текст:

I don't have a service manual for you, however I've taken apart my Powershot S500 several times, including opening the lens/sensor assembly to successfully clean dust on the sensor.

I documented it in [guide|1261|this teardown report] here on ifixit.  From other Powershot cameras I have seen and poked around with, the construction of others is very similar so even if you're wanting to do this with a different model, you may find my photos instructive.

I also notice there are some additional repair guides for other models here on ifixit now - take a look at those also.

if you are handy with taking apart things and handling tiny screws and delicate ribbon cables, you may be able to take apart your camera without a service manual. basically just take it apart one screw at a time, save and label where the screws go, and perhaps take photos along the way (that's how my teardown photos came about).  then reverse the process when done. good luck!

Статус:

open