Перейти к основному содержанию
Помощь

Текущая версия: oldturkey03 ,

Текст:

Erikka Holderness, corrosion should usually clean oi\ofof with a vinegar/sterile water solution. Use a cotton swab pror soft toothbrush to clean the contacts. Rinse with sterile water after that, you may have to repeat this step a couple of times. Once it is properly cleaned, use 90%+ isopropyl alcohol to displace andany left over water (depending on where the contacts are situated). Hope this helps, good luck.
Erikka Holderness, corrosion should usually clean oi\ofof with a vinegar/sterile water solution. Use a cotton swab pror soft toothbrush to clean the contacts. Rinse with sterile water after that, you may have to repeat this step a couple of times. Once it is properly cleaned, use 90%+ isopropyl alcohol to displace andany left over water (depending on where the contacts are situated). Hope this helps, good luck.

Статус:

open

Отредактировано: oldturkey03 ,

Текст:

Erikka Holderness, corrosion should usually clean oi\of with a vinegar/sterile water solution. Use a cotton swab pr soft toothbrush to clean the contacts. Rinse with sterile water after that, you may have to repeat this step a couple of times. Once it is properly cleaned, use 90%+ isopropyl alcohol to displace and left over water (depending on where the contacts are situatedsituated). Hope this helps, good luck.
Erikka Holderness, corrosion should usually clean oi\of with a vinegar/sterile water solution. Use a cotton swab pr soft toothbrush to clean the contacts. Rinse with sterile water after that, you may have to repeat this step a couple of times. Once it is properly cleaned, use 90%+ isopropyl alcohol to displace and left over water (depending on where the contacts are situatedsituated). Hope this helps, good luck.

Статус:

open

Оригинальный сообщение: oldturkey03 ,

Текст:

Erikka Holderness, corrosion should usually clean oi\of with a vinegar/sterile water solution. Use a cotton swab pr soft toothbrush to clean the contacts. Rinse with sterile water after that, you may have to repeat this step a couple of times. Once it is properly cleaned, use 90%+ isopropyl alcohol to displace and left over water (depending on where the contacts are situated

Статус:

open