Перейти к основному содержанию
Помощь

Текущая версия: Dan ,

Текст:

First make sure you open them when you take the ribbons out to start with! If you don't you can damage things. When I am inserting it back I make sure the connector is still open.
I use some electricians tape which I place onto the ribbon cable to help in both pulling it out as well as pushing it back in.
I like electricians tape as its adhesive is weak enough to peel the tape off without damaging things. To help, I fold over the end to create a tab.
-When inserting make sure you are square to the connector and make sure you have inverted the ribbon fully before latching the connector closed
+When inserting make sure you are square to the connector and make sure you have inserted the ribbon fully before latching the connector closed

Статус:

open

Отредактировано: Dan ,

Текст:

First make sure you open them when you take the ribbons out to start with! If you don't you can damage things. When I am inserting it back I make sure the connector is still open.
I use some electricians tape which I place onto the ribbon cable to help in both pulling it out as well as pushing it back in.
-I like the electricians tape as its adhesive is weak enough to peel the tape off without damaging things. To help I fold over the end to create a tab.
+I like electricians tape as its adhesive is weak enough to peel the tape off without damaging things. To help, I fold over the end to create a tab.
When inserting make sure you are square to the connector and make sure you have inverted the ribbon fully before latching the connector closed

Статус:

open

Оригинальный сообщение: Dan ,

Текст:

First make sure you open them when you take the ribbons out to start with! If you don't you can damage things. When I am inserting it back I make sure the connector is still open.

I use some electricians tape which I place onto the ribbon cable to help in both pulling it out as well as pushing it back in.

I like the electricians tape as its adhesive is weak enough to peel the tape off without damaging things. To help I fold over the end to create a tab.

When inserting make sure you are square to the connector and make sure you have inverted the ribbon fully before latching the connector closed

Статус:

open