Перейти к основному содержанию

Оригинальный сообщение: Kevin Church ,


The JD Razor 2000's wheels become wobbly, it is probably at least one of two things: Flattened wheel round, or the wheel needs some tightening.

If the wheel is actually tipping the wrong way in its axis, you may just need to tighten the screws.  Using a hex key, tighten the screw on either side of the wheel.  If the wheel is still wobbly, it may need to be replaced.

Extensive and constant use of the scooter will flatten the wheels and take away their stability.  Check your wheels' shape.  If they look flat or squared on the rim, they are too worn down to ride safely and are most likely causing the wobbling.  You should replace your wheels.

For help replacing the wheels on your JD Razor 2000, visit the guides:

[guide|32495|Front Wheel Replacement]

[guide|32489|Back Wheel Replacement]

If you suspect there might be an additional problem with the wheel, you can visit the [[JD Razor 2000 Troubleshooting|JD Razor 2000 Troubleshooting page]] on the [[Topic:JD Razor 2000|JD Razor 2000 device page]]