Перейти к основному содержанию
Помощь

Текущая версия: John ,

Текст:

If you feel comfortable doing it your board needs a reflow if done by in oven or heat gun I would recommend practice on a junk motherboard and purchasing some no clean reflow flux and probably some kapton tape if not there are repair services that do this on the Bay i'm 98% positive this is your problem the most most service guys will reflow it if you can spring for the new chip even better.
If you feel comfortable doing it your board needs a reflow if done by in oven or heat gun I would recommend practice on a junk motherboard and purchasing some no clean reflow flux and probably some kapton tape if not there are repair services that do this on the Bay i'm 98% positive this is your problem the most most service guys will reflow it if you can spring for the new chip even better.

Статус:

open

Оригинальный сообщение: John ,

Текст:

If you feel comfortable doing it your board needs a reflow if done by in oven  or heat gun I would recommend practice on a junk motherboard and purchasing some no clean reflow flux and probably some kapton tape if not there are repair services that do this on the Bay i'm 98% positive this is your problem the most service guys will reflow it if you can spring for the new chip even better.

Статус:

open