Перейти к основному содержанию
Помощь

Текущая версия: yotaruvegeta ,

Название:

How to realign blu-ray dirve

Текст:

I had a YLOD problem. Before I eventually fixed it, I made the mistake of going into the blu ray drive and pulling out the disc that was stuck inside.

I think that this screwed with the ability of the drive to draw in discs like it normally does. What steps should I follow to properly reset this and get it to take in discs?

I have done the method where you unscrew one of the gears and that snaps everything back into place, but that doesn't seem to be all that I need to do. What position do the "arms" need to be in, for instance?

Устройство:

PlayStation 3

Статус:

open

Принятый ответ:

28479

Отредактировано: yotaruvegeta ,

Название:

How to realign blu-ray dirve

Текст:

I had a YLOD problem. Before I eventually fixed it, I made the mistake of going into the blu ray drive and pulling out the disc that was stuck inside.
 
I think that this screwed with the ability of the drive to draw in discs like it normally does. What steps should I follow to properly reset this and get it to take in discs?
 
I have done the method where you unscrew one of the gears and that snaps eveythingeverything back into place, but that doesn't seem to be all that I need to do. What position do the "arms" need to be in, for instance?
I have done the method where you unscrew one of the gears and that snaps eveythingeverything back into place, but that doesn't seem to be all that I need to do. What position do the "arms" need to be in, for instance?

Устройство:

PlayStation 3

Статус:

open

Оригинальный сообщение: yotaruvegeta ,

Название:

How to realign blu-ray dirve

Текст:

I had a YLOD problem. Before I eventually fixed it, I made the mistake of going into the blu ray drive and pulling out the disc that was stuck inside.

I think that this screwed with the ability of the drive to draw in discs like it normally does. What steps should I follow to properly reset this and get it to take in discs?

I have done the method where you unscrew one of the gears and that snaps eveything back into place, but that doesn't seem to be all that I need to do. What position do the "arms" need to be in, for instance?

Устройство:

PlayStation 3

Статус:

open