Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Помощь

Текущая версия: Dan ,

Текст:

Well stated question for a late Saturday night.
 
Let me address the hard drive issue first, you have several questions here and I may go to sleep before addressing them. The 2010 iMac used a Apple proprietary hard drive with special heat sensors. There are three different sensors for the three major brands of hard drives, Using the wrong drive or matching with the wrong sensor will cause the fans to run away and burn up the hard dive. OWC offers a fix for the drives without the custom sensor port, but it's about $40.
 
The Apple Hard drive sensors are:
 
Apple Part #'s
 
* 922-9215 - Hitachi
* 922-9216 - Seagate
* 922-9622 - Western digital
 
I do like the Seagate SSHD drives, I've had one failure in the last 100 drives I've installed and it was bad from the git-go.
 
Here's the info on the OWC solution: http://eshop.macsales.com/item/OWC/DIDIMACHDD09/
 
'''RAM Upgrade:'''
 
* RAM Type: PC3-10600 DDR3 Min. RAM Speed: 1333 MHz
 
* Details: Supports 1333 MHz PC3-10600 DDR3 SO-DIMMs (204-pin).
* Standard RAM: 4 GB Maximum RAM: 16 GB
 
Details: By default, 4 GB of RAM is installed as two 2 GB SO-DIMM modules. Two slots free.
 
To max out use 4X4 to get to 16.
 
Better is to just add 2 - 4 MB sticks and take it to 12MB. Just my opinion.
 
'''CPU upgrade:'''Info:'''
'''CPU upgrade:'''Info:'''
The iMac "Core i5" 3.6 21.5-Inch (Mid-2010) technically is a "configure-to-order" configuration of the iMac "Core i3" 3.2 21.5-Inch (Mid-2010), The iMac "Core i5" 3.6 21.5-Inch Aluminum (Mid-2010) is powered by a dual core 3.6 GHz Intel "Core i5" I5-680 (Clarkdale) processor with a dedicated 256k level 2 cache for each core and a 4 MB shared level 3 cache. In lieu of a system bus, it has a "Direct Media Interface" (DMI) that "connects between the processor and chipset" at 2.5 GT/s.
 
That's all I will give you for tonight as It's past my bed time and they don't pay me for overtime. In fact they don't pay me at all, I'm just a volunteer here.

Статус:

open

Отредактировано: Dan ,

Текст:

Well stated question for a late Saturday night.
 
Let me address the hard drive issue first, you have several questions here and I may go to sleep before addressing them. The 2010 iMac used a Apple proprietary hard drive with special heat sensors. There are three different sensors for the three major brands of hard drives, Using the wrong drive or matching with the wrong sensor will cause the fans to run away and burn up the hard dive. OWC offers a fix for the drives without the custom sensor port, but it's about $40.
 
The Apple Hard drive sensors are:
 
Apple Part #'s
 
* 922-9215 - Hitachi
* 922-9216 - Seagate
* 922-9622 - Western digital
 
I do like the Seagate SSHD drives, I've had one failure in the last 100 drives I've installed and it was bad from the git-go.
 
Here's the info on the OWC solution: http://eshop.macsales.com/item/OWC/DIDIMACHDD09/
 
'''RAM Upgrade:'''
*


*
RAM Type: PC3-10600 DDR3 Min. RAM Speed: 1333 MHz
'''RAM Upgrade:'''
*


*
RAM Type: PC3-10600 DDR3 Min. RAM Speed: 1333 MHz
* Details: Supports 1333 MHz PC3-10600 DDR3 SO-DIMMs (204-pin).
* Standard RAM: 4 GB Maximum RAM: 16 GB
 
Details: By default, 4 GB of RAM is installed as two 2 GB SO-DIMM modules. Two slots free.
 
To max out use 4X4 to get to 16.
 
Better is to just add 2 - 4 MB sticks and take it to 12MB. Just my opinion.
 
'''CPU upgrade:''' The
The
iMac "Core i5" 3.6 21.5-Inch (Mid-2010) technically is a "configure-to-order" configuration of the iMac "Core i3" 3.2 21.5-Inch (Mid-2010), The iMac "Core i5" 3.6 21.5-Inch Aluminum (Mid-2010) is powered by a dual core 3.6 GHz Intel "Core i5" I5-680 (Clarkdale) processor with a dedicated 256k level 2 cache for each core and a 4 MB shared level 3 cache. In lieu of a system bus, it has a "Direct Media Interface" (DMI) that "connects between the processor and chipset" at 2.5 GT/s.
'''CPU upgrade:''' The
The
iMac "Core i5" 3.6 21.5-Inch (Mid-2010) technically is a "configure-to-order" configuration of the iMac "Core i3" 3.2 21.5-Inch (Mid-2010), The iMac "Core i5" 3.6 21.5-Inch Aluminum (Mid-2010) is powered by a dual core 3.6 GHz Intel "Core i5" I5-680 (Clarkdale) processor with a dedicated 256k level 2 cache for each core and a 4 MB shared level 3 cache. In lieu of a system bus, it has a "Direct Media Interface" (DMI) that "connects between the processor and chipset" at 2.5 GT/s.
 
That's all I will give you for tonight as It's past my bed time and they don't pay me for overtime. In fact they don't pay me at all, I'm just a volunteer here.

Статус:

open

Отредактировано: Dan ,

Текст:

Well stated question for a late Saturday night.
 
Let me address the hard drive issue first, you have several questions here and I may go to sleep before addressing them. The 2010 iMac used a Apple proprietary hard drive with special heat sensors. There are three different sensors for the three major brands of hard drives, Using the wrong drive or matching with the wrong sensor will cause the fans to run away and burn up the hard dive. OWC offers a fix for the drives without the custom sensor port, but it's about $40.
 
The Apple Hard drive sensors are:
 
Apple Part #

922-9215 Hitachi

922-9216 Seagate

(22-9622
#'s
* 922-9215 - Hitachi
* 922-9216 - Seagate
* 922-9622 -
Western digital
Apple Part #

922-9215 Hitachi

922-9216 Seagate

(22-9622
#'s
* 922-9215 - Hitachi
* 922-9216 - Seagate
* 922-9622 -
Western digital
 
I do like the Seagate SSHD drives, I've had one failure in the last 100 drives I've installed and it was bad from the git-go.
 
Here's the info on the OWC solution: http://eshop.macsales.com/item/OWC/DIDIMACHDD09/
 
RAM

RAM
'''RAM Upgrade:'''
* RAM
Type: PC3-10600 DDR3 Min. RAM Speed: 1333 MHz

Details: Supports

* Details: Supports
1333 MHz PC3-10600 DDR3 SO-DIMMs (204-pin).

Standard

* Standard
RAM: 44 GB MaximumMaximum RAM: 1616 GB
RAM

RAM
'''RAM Upgrade:'''
* RAM
Type: PC3-10600 DDR3 Min. RAM Speed: 1333 MHz

Details: Supports

* Details: Supports
1333 MHz PC3-10600 DDR3 SO-DIMMs (204-pin).

Standard

* Standard
RAM: 44 GB MaximumMaximum RAM: 1616 GB
 
Details: ByBy default, 4 GB of RAM is installed as two 2 GB SO-DIMM modules. Two slots free.
Details: ByBy default, 4 GB of RAM is installed as two 2 GB SO-DIMM modules. Two slots free.
 
To max out use 4X4 to get to 16.
 
Better is to just add 2 - 4 MB sticks and take it to 12MB. Just my opinion.
 
CPU upgrade The'''CPU upgrade:''' The iMac "Core i5" 3.6 21.5-Inch (Mid-2010) technically is a "configure-to-order" configuration of the iMac "Core i3" 3.2 21.5-Inch (Mid-2010), The iMac "Core i5" 3.6 21.5-Inch Aluminum (Mid-2010) is powered by a dual core 3.6 GHz Intel "Core i5" I5-680 (Clarkdale) processor with a dedicated 256k level 2 cache for each core and a 4 MB shared level 3 cache. In lieu of a system bus, it has a "Direct Media Interface" (DMI) that "connects between the processor and chipset" at 2.5 GT/s.
CPU upgrade The'''CPU upgrade:''' The iMac "Core i5" 3.6 21.5-Inch (Mid-2010) technically is a "configure-to-order" configuration of the iMac "Core i3" 3.2 21.5-Inch (Mid-2010), The iMac "Core i5" 3.6 21.5-Inch Aluminum (Mid-2010) is powered by a dual core 3.6 GHz Intel "Core i5" I5-680 (Clarkdale) processor with a dedicated 256k level 2 cache for each core and a 4 MB shared level 3 cache. In lieu of a system bus, it has a "Direct Media Interface" (DMI) that "connects between the processor and chipset" at 2.5 GT/s.
 
That's all I will give you for tonight as It's past my bed time and they don't pay me for overtime. InIn fact they don't pay me at all, I'm just a volunteer here.
That's all I will give you for tonight as It's past my bed time and they don't pay me for overtime. InIn fact they don't pay me at all, I'm just a volunteer here.

Статус:

open

Отредактировано: Dan ,

Текст:

Well stated question for a late Saturday night.
 
Let me address the hard drive issue first, you have several questions here and I may go to sleep before addressing them. The 2010 iMac used a Apple priorityproprietary hard drive with special heat sensors. There are three different sensorsensors for thethe three major brands of hard drives, Using the wrong drive or matching with the wrong sensor will cause the fans to run away and burn up the hard dive. OWC offers a fix for the drives without the custom sensor port, but it's about $40.
Let me address the hard drive issue first, you have several questions here and I may go to sleep before addressing them. The 2010 iMac used a Apple priorityproprietary hard drive with special heat sensors. There are three different sensorsensors for thethe three major brands of hard drives, Using the wrong drive or matching with the wrong sensor will cause the fans to run away and burn up the hard dive. OWC offers a fix for the drives without the custom sensor port, but it's about $40.
 
The Apple Hard drive sensors are:
 
Apple Part #
 
922-9215 Hitachi
 
922-9216 Seagate
 
(22-9622 Western digital
 
I do like the Seagate SSHD drives, I've had one failure in the last 100 drives I've installed and it was bad from the git-go.
 
Here's the info on the OWC solution: http://eshop.macsales.com/item/OWC/DIDIMACHDD09/
 
RAM
 
RAM Type: PC3-10600 DDR3 Min. RAM Speed: 1333 MHz
 
Details: Supports 1333 MHz PC3-10600 DDR3 SO-DIMMs (204-pin).
 
Standard RAM: 4 GB Maximum RAM: 16 GB
 
Details: By default, 4 GB of RAM is installed as two 2 GB SO-DIMM modules. Two slots free.
 
To max out use 4X4 to get to 16.
 
Better is to just add 2 - 4 MB sticks and take it to 12MB. Just my opinion.
 
CPU upgrade The iMac "Core i5" 3.6 21.5-Inch (Mid-2010) technically is a "configure-to-order" configuration of the iMac "Core i3" 3.2 21.5-Inch (Mid-2010), The iMac "Core i5" 3.6 21.5-Inch Aluminum (Mid-2010) is powered by a dual core 3.6 GHz Intel "Core i5" I5-680 (Clarkdale) processor with a dedicated 256k level 2 cache for each core and a 4 MB shared level 3 cache. In lieu of a system bus, it has a "Direct Media Interface" (DMI) that "connects between the processor and chipset" at 2.5 GT/s.
 
That's all I will give you for tonight as It's past my bed time and they don't pay me for overtime. In fact they don't pay me at all, I'm just a volunteer here.

Статус:

open

Отредактировано: mayer ,

Текст:

Well stated question for a late Saturday night.
 
Let me address the hard drive issue first, you have several questions here and I may go to sleep before addressing them. The 2010 iMac used a Apple priority hard drive with special heat sensors. There are three different sensor for the three major brands of hard drives, Using the wrong drive or matching with the wrong sensor will cause the fans to run away and burn up the hard dive. OWC offers a fix for the drives without the custom sensor port, but it's about $40.
 
 
The Apple Hard drive sensors are:
Apple Part #
 
922-9215 Hitachi
 
922-9216 Seagate
 
(22-9622 Western digital
 
I do like the Seagate SSHD drives, I've had one failure in the last 100 drives I've installed and it was bad from the git-go.
 
Here's the info on the OWC solution: http://eshop.macsales.com/item/OWC/DIDIMACHDD09/
 
RAM
 
RAM Type: PC3-10600 DDR3 Min. RAM Speed: 1333 MHz
 
Details: Supports 1333 MHz PC3-10600 DDR3 SO-DIMMs (204-pin).
 
Standard RAM: 4 GB Maximum RAM: 16 GB
 
Details: By default, 4 GB of RAM is installed as two 2 GB SO-DIMM modules. Two slots free.
 
To max out use 4X4 to get to 16.
 
Better is to just add 2 - 4 MB sticks and take it to 12MB. Just my opinion.
 
CPU upgrade The iMac "Core i5" 3.6 21.5-Inch (Mid-2010) technically is a "configure-to-order" configuration of the iMac "Core i3" 3.2 21.5-Inch (Mid-2010), The iMac "Core i5" 3.6 21.5-Inch Aluminum (Mid-2010) is powered by a dual core 3.6 GHz Intel "Core i5" I5-680 (Clarkdale) processor with a dedicated 256k level 2 cache for each core and a 4 MB shared level 3 cache. In lieu of a system bus, it has a "Direct Media Interface" (DMI) that "connects between the processor and chipset" at 2.5 GT/s.
 
That's all I will give you for tonight as It's past my bed time and they don't pay me for overtime. In fact they don't pay me at all, I'm just a volunteer here.

Статус:

open

Отредактировано: mayer ,

Текст:

Well stated question for a late Saturday night (most of the other questions seem to be asked by dope smokers and are inane.)
night.
Well stated question for a late Saturday night (most of the other questions seem to be asked by dope smokers and are inane.)
night.
Let me address the hard drive issue first, you have several questions here and I may go to sleep before addressing them. The 2010 iMac used a Apple priority hard drive with special heat sensors. There are three different sensor for the three major brands of hard drives, Using the wrong drive or matching with the wrong sensor will cause the fans to run away and burn up the hard dive. OWC offers a fix for the drives without the custom sensor port, but it's about $40.
 
Apple Part #
 
922-9215 Hitachi
 
922-9216 Seagate
 
(22-9622 Western digital
 
I do like the Seagate SSHD drives, I've had one failure in the last 100 drives I've installed and it was bad from the git-go.
 
Here's the info on the OWC solution: http://eshop.macsales.com/item/OWC/DIDIMACHDD09/
 
RAM
 
RAM Type: PC3-10600 DDR3 Min. RAM Speed: 1333 MHz
 
Details: Supports 1333 MHz PC3-10600 DDR3 SO-DIMMs (204-pin).
 
Standard RAM: 4 GB Maximum RAM: 16 GB
 
Details: By default, 4 GB of RAM is installed as two 2 GB SO-DIMM modules. Two slots free.
 
To max out use 4X4 to get to 16.
 
Better is to just add 2 - 4 MB sticks and take it to 12MB. Just my opinion.
 
CPU upgrade The iMac "Core i5" 3.6 21.5-Inch (Mid-2010) technically is a "configure-to-order" configuration of the iMac "Core i3" 3.2 21.5-Inch (Mid-2010), The iMac "Core i5" 3.6 21.5-Inch Aluminum (Mid-2010) is powered by a dual core 3.6 GHz Intel "Core i5" I5-680 (Clarkdale) processor with a dedicated 256k level 2 cache for each core and a 4 MB shared level 3 cache. In lieu of a system bus, it has a "Direct Media Interface" (DMI) that "connects between the processor and chipset" at 2.5 GT/s.
 
That's all I will give you for tonight as It's past my bed time and they don't pay me for overtime. In fact they don't pay me at all, I'm just a volunteer here.

Статус:

open

Отредактировано: mayer ,

Текст:

Well stated question for a Saturday night (most of the other questions seem to be asked by dope smokers and are inane.)
 
Let me address the hard drive issue first, you have several questions here and I may go to sleep before addressing them. The 2010 iMac used a Apple priority hard drive with special heat sensors. There are three different sensor for the three major brands of hard drives, Using the wrong drive or matching with the wrong sensor will cause the fans to run away and burn up the hard dive. OWC offers a fix for the drives without the custom sensor port, but it's about $45$40.
Let me address the hard drive issue first, you have several questions here and I may go to sleep before addressing them. The 2010 iMac used a Apple priority hard drive with special heat sensors. There are three different sensor for the three major brands of hard drives, Using the wrong drive or matching with the wrong sensor will cause the fans to run away and burn up the hard dive. OWC offers a fix for the drives without the custom sensor port, but it's about $45$40.
 
Apple Part #
 
922-9215 Hitachi
 
922-9216 Seagate
 
(22-9622 Western digital
 
I do like the Seagate SSHD drives, I've had one failure in the last 100 drives I've installed and it was bad from the git-go.
 
Here's the info on the OWC solution: http://eshop.macsales.com/item/OWC/DIDIMACHDD09/
 
RAM
 
RAM Type: PC3-10600 DDR3 Min. RAM Speed: 1333 MHz
 
Details: Supports 1333 MHz PC3-10600 DDR3 SO-DIMMs (204-pin).
 
Standard RAM: 4 GB Maximum RAM: 16 GB
 
Details: By default, 4 GB of RAM is installed as two 2 GB SO-DIMM modules. Two slots free.
 
To max out use 4X4 to get to 16.
 
Better is to just add 2 - 4 MB sticks and take it to 12MB. Just my opinion.
 
CPU upgrade The iMac "Core i5" 3.6 21.5-Inch (Mid-2010) technically is a "configure-to-order" configuration of the iMac "Core i3" 3.2 21.5-Inch (Mid-2010), The iMac "Core i5" 3.6 21.5-Inch Aluminum (Mid-2010) is powered by a dual core 3.6 GHz Intel "Core i5" I5-680 (Clarkdale) processor with a dedicated 256k level 2 cache for each core and a 4 MB shared level 3 cache. In lieu of a system bus, it has a "Direct Media Interface" (DMI) that "connects between the processor and chipset" at 2.5 GT/s.
 
That's all I will give you for tonight as It's past my bed time and they don't pay me for overtime. In fact they don't pay me at all, I'm just a volunteer here.

Статус:

open

Оригинальный сообщение: mayer ,

Текст:

Well stated question for a Saturday night (most of the other questions seem to be asked by dope smokers and are inane.)

Let me address the hard drive issue first, you have several questions here and I may go to sleep before addressing them.  The 2010 iMac used a Apple priority hard drive with special heat sensors.  There are three different sensor for  the three major brands of hard drives,  Using the wrong drive or matching with the wrong sensor will cause the fans to run away and burn up the hard dive.  OWC offers a fix for the drives without the custom sensor port, but it's about $45.

Apple Part #

922-9215  Hitachi

922-9216  Seagate

(22-9622 Western digital

I do like the Seagate SSHD drives, I've had one failure in the last 100 drives I've installed and it was bad from the git-go.

Here's the info on the OWC solution:  http://eshop.macsales.com/item/OWC/DIDIMACHDD09/

RAM

RAM Type:    PC3-10600 DDR3    Min. RAM Speed:    1333 MHz

Details:    Supports 1333 MHz PC3-10600 DDR3 SO-DIMMs (204-pin).

Standard RAM:    4 GB    Maximum RAM:    16 GB

Details:    By default, 4 GB of RAM is installed as two 2 GB SO-DIMM modules. Two slots free.

To max out use 4X4 to get to 16.

Better is to just add 2 - 4 MB sticks and take it to 12MB.  Just my opinion.

CPU upgrade   The iMac "Core i5" 3.6 21.5-Inch (Mid-2010) technically is a "configure-to-order" configuration of the iMac "Core i3" 3.2 21.5-Inch (Mid-2010),   The iMac "Core i5" 3.6 21.5-Inch Aluminum (Mid-2010) is powered by a dual core 3.6 GHz Intel "Core i5" I5-680 (Clarkdale) processor with a dedicated 256k level 2 cache for each core and a 4 MB shared level 3 cache. In lieu of a system bus, it has a "Direct Media Interface" (DMI) that "connects between the processor and chipset" at 2.5 GT/s.

That's all I will give you for tonight as It's past my bed time and they don't pay me for overtime.  In fact they don't pay me at all, I'm just a volunteer here.

Статус:

open