Перейти к основному содержанию
Помощь

Текущая версия: jotburke ,

Текст:

Locate the DG Board (Audio) and re-solder the DG Board connector pins of both power supply connector from the main Power Supply Board ~Board.

A
"dry joint" was not allowing DGtheDG board to fully 'diagnose and reset' on Power On...

( In my case the DG board was the TNPA4311 )
Locate the DG Board (Audio) and re-solder the DG Board connector pins of both power supply connector from the main Power Supply Board ~Board.

A
"dry joint" was not allowing DGtheDG board to fully 'diagnose and reset' on Power On...

( In my case the DG board was the TNPA4311 )

Статус:

open

Оригинальный сообщение: jotburke ,

Текст:

Locate the DG Board (Audio) and re-solder the DG Board connector pins of both power supply connector from the main Power Supply Board ~ "dry joint" not allowing DG board to fully 'diagnose and reset' on Power On...

Статус:

open