Skip to main content
Помощь

Текущая версия: oldturkey03 (подробности голоса) ,

Название:

How to replace a blown resistor and added conundrums?

Текст:

[image|886082]

[image|886078]

There is  a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.

Is the best option to cut it out to see if I can match it up or look for a new board?

Устройство:

Oster Digital Electric Kettle BVST-EK5967

Статус:

open

Принятый ответ:

332290

Отредактировано: Perkins ,

Название:

How to replace a different fusible link than the thermal fuseblown resistor and added conundrums?
How to replace a different fusible link than the thermal fuseblown resistor and added conundrums?

Текст:

[image|886082][image|886078image|886082]

[image|886078
]
[image|886082][image|886078image|886082]

[image|886078
]
 
There is a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.
 
Is the best option to cut it out to see if I can match it up or look for a new board?

Устройство:

Oster Digital Electric Kettle BVST-EK5967

Статус:

open

Отредактировано: Perkins ,

Название:

How to replace a different fusible link than the thermal fuse?

Текст:

[image|886078image|886082][image|886078]
[image|886078image|886082][image|886078]
 
There is a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.
 
Is the best option to cut it out to see if I can match it up or look for a new board?

Устройство:

Oster Digital Electric Kettle BVST-EK5967

Статус:

open

Отредактировано: Perkins ,

Название:

How to replace a different fusible link than the thermal fuse?

Текст:

[image|886078]Thereimage|886078]

There
is a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.
[image|886078]Thereimage|886078]

There
is a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.
 
Is the best option to cut it out to see if I can match it up or look for a new board?

Устройство:

Oster Digital Electric Kettle BVST-EK5967

Статус:

open

Отредактировано: Perkins ,

Название:

How to replace a different fusible link than the thermal fuse?

Текст:

There[image|886078]There is a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.
There[image|886078]There is a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.
 
Is the best option to cut it out to see if I can match it up or look for a new board?

Устройство:

Oster Digital Electric Kettle BVST-EK5967

Статус:

open

Оригинальный сообщение: Perkins ,

Название:

How to replace a different fusible link than the thermal fuse?

Текст:

There is  a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.

Is the best option to cut it out to see if I can match it up or look for a new board?

Устройство:

Oster Digital Electric Kettle BVST-EK5967

Статус:

open