Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Помощь

Оригинальный сообщение: Carles Arasil ,

Текст:

I have found two broken-solder pads from bottom RAM slot that makes random crashes and restarts. I have these problem many time and I run with only with top slot.

It was very hard to make a good solder joint with them but, when I get it, machine is rock solid using both RAM slots.

Check it touching different slot zones getting some pressure and see if machine crashes to see if it is a problem with RAM solts.

Good luck guys.

Статус:

open