Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Помощь

Текущая версия: oldturkey03 (подробности голоса) ,

Название:

Anyway to repair the copper traces on motherboard?

Текст:

hi to all,

I was trying to replace charging chip on an iPhone 6. In the past I use to solder the laptop and desktop motherboards but nothing this small as the iPhone 6 motherboard.

Anyway, I used the heat gun, some flux, and everything seemed ok but later under the microscope I noticed that there are few round circle pins missing. I probably didn't heat the motherboard enough and while removing chip I probably tore the trace and removed with those small copper pins.

The question is: Is there anyway to repair them? I presume that the where somehow connected to the copper via's inside the motherboard.

Is there anyway to solder/glue them back again?

=== Update (04/01/2017) ===

here it is attached, and sorry it is not iphone 6 but iphone 6s. According to the schematic pins are A4 and D4

[image|1066838]

Устройство:

iPhone 6s

Статус:

open

Принятый ответ:

387446

Отредактировано: Minho ,

Название:

Anyway to repair the copper traces on motherboard?

Текст:

hi to all,

I was trying to replace charging chip on an iPhone 6. In the past I use to solder the laptop and desktop motherboards but nothing this small as the iPhone 6 motherboard.

Anyway, I used the heat gun, some flux, and everything seemed ok but later under the microscope I noticed that there are few round circle pins missing. I probably didn't heat the motherboard enough and while removing chip I probably tore the trace and removed with those small copper pins.

The question is: Is there anyway to repair them? I presume that the where somehow connected to the copper via's inside the motherboard.

Is there anyway to solder/glue them back again?

=== Update (04/01/2017) ===

here it is attached, and sorry it is not iphone 6 but iphone 6s. According to the schematic pins are A4 and D4

[image|1066838]

Устройство:

iPhone 66s
iPhone 66s

Статус:

open

Отредактировано: myth ,

Название:

Anyway to repair the copper traces on motherboard?

Текст:

hi to all,
hi to all,
 
I was trying to replace charging chip on an iPhone 6. In the past I use to solder the laptop and desktop motherboards but nothing this small as the iPhone 6 motherboard.
 
Anyway, I used the heat gun, some flux, and everything seemed ok but later under the microscope I noticed that there are few round circle pins missing. I probably didn't heat the motherboard enough and while removing chip I probably tore the trace and removed with those small copper pins.
Anyway, I used the heat gun, some flux, and everything seemed ok but later under the microscope I noticed that there are few round circle pins missing. I probably didn't heat the motherboard enough and while removing chip I probably tore the trace and removed with those small copper pins.
 
The question is: Is there anyway to repair them? I presume that the where somehow connected to the copper via's inside the motherboard.
The question is: Is there anyway to repair them? I presume that the where somehow connected to the copper via's inside the motherboard.
 
Is there anyway to solder/glue them back again?
 
=== Update (04/01/2017) ===
 
here it is attached, and sorry it is not iphone 6 but iphone 6s. According to the schematic pins are A4 and D4
 
[image|1066838]

Устройство:

iPhone 6

Статус:

open

Отредактировано: Dan ,

Название:

any wayAnyway to recover cooperrepair the copper traces on motherboard?
any wayAnyway to recover cooperrepair the copper traces on motherboard?

Текст:

hi to all, i was trying to replace charging chip on iphone 6..in the past i use to solder the laptop and desktop motherboards but nothing this small as iphone 6 motherboard.
hi to all, i was trying to replace charging chip on iphone 6..in the past i use to solder the laptop and desktop motherboards but nothing this small as iphone 6 motherboard.
 
Anyway, iI was trying to replace charging chip on an iPhone 6. In the past I use to solder the laptop and desktop motherboards but nothing this small as the iPhone 6 motherboard.

Anyway, I
used the heat gun, some flux, and everything seemed ok but later under the microscope i noticeI noticed that there are few round circle pins missing. I probably didntdidn't heat the motherboard enough and while removing chip iI probably tearedtore the trace and removed with him those small coopercopper pins. The

The
question is isis: Is there any wayanyway to recoverrepair them? iI presume that the werewhere somehow connected to the cooper netscopper via's inside the motherboard. Is

Is
there anyway to solder/glue them back again?
Anyway, iI was trying to replace charging chip on an iPhone 6. In the past I use to solder the laptop and desktop motherboards but nothing this small as the iPhone 6 motherboard.

Anyway, I
used the heat gun, some flux, and everything seemed ok but later under the microscope i noticeI noticed that there are few round circle pins missing. I probably didntdidn't heat the motherboard enough and while removing chip iI probably tearedtore the trace and removed with him those small coopercopper pins. The

The
question is isis: Is there any wayanyway to recoverrepair them? iI presume that the werewhere somehow connected to the cooper netscopper via's inside the motherboard. Is

Is
there anyway to solder/glue them back again?

Устройство:

iPhone 6

Статус:

open

Оригинальный сообщение: myth ,

Название:

any way to recover cooper on motherboard?

Текст:

hi to all, i was trying to replace charging chip on iphone 6..in the past i use to solder the laptop and desktop motherboards but nothing this small as iphone 6 motherboard.

Anyway, i used the heat gun, some flux, and everything seemed ok but later under the microscope i notice that there are few round circle pins missing. I probably didnt heat the motherboard enough and while removing chip i probably teared and removed with him those small cooper pins. The question is is there any way to recover them? i presume that the were somehow connected to the cooper nets inside the motherboard. Is there anyway to solder/glue them back again?

Устройство:

iPhone 6

Статус:

open