Перейти к основному содержанию
Помощь

Текущая версия: Minho ,

Текст:

I don't recommend shaking your phone or leaving the water to air dry. This standing water, even a very thin film, will corrode the connection points on the logic board. Once evaporated, it will leave mineral or other deposits that could short the logic board. The longer you let it sit, the more damage it can do.
 
* Open your phone and remove the logic board ([guide|20246|follow this guide])
* Inspect the logic board, especially around the connectors and look for corrosion.
* Inspect both sides of the board. Unfortunately, 80% of the board is covered in shields. That's usually where the damage is occurring.
* Put your board in a container with >90% isopropyl alcohol and let it sit for a while.
* Use a soft brush, like a toothbrush and lightly brush away any corrosion you see.
* Rinse in alcohol and repeat.
* Let it air dry for a day.
* Re-assemble and hope for the best.
 
You should also consider getting a new battery if it has swollen. Resist the temptation to !$$&*/poppop it to let the gas out. A compromised Li-ion battery is a fire hazard. If the device appears to power up but behaves erratically, then use a tool like 3uTools to flash the firmware as it may be corrupted.
You should also consider getting a new battery if it has swollen. Resist the temptation to !$$&*/poppop it to let the gas out. A compromised Li-ion battery is a fire hazard. If the device appears to power up but behaves erratically, then use a tool like 3uTools to flash the firmware as it may be corrupted.
 
A professional repair shop that does water damage repair may be able to recover your phone or the data because they have access to pro-level ultrasonic baths and specialized cleaners as well as the skills to troubleshoot your board. Many shops have a no fix/no fee policy so you don't have to spend money to find out if the phone is fixable or not.

Статус:

open

Оригинальный сообщение: Minho ,

Текст:

I don't recommend shaking your phone or leaving the water to air dry. This standing water, even a very thin film, will corrode the connection points on the logic board. Once evaporated, it will leave mineral or other deposits that could short the logic board. The longer you let it sit, the more damage it can do.

* Open your phone and remove the logic board ([guide|20246|follow this guide])
* Inspect the logic board, especially around the connectors and look for corrosion.
* Inspect both sides of the board. Unfortunately, 80% of the board is covered in shields. That's usually where the damage is occurring.
* Put your board in a container with >90% isopropyl alcohol and let it sit for a while.
* Use a soft brush, like a toothbrush and lightly brush away any corrosion you see.
* Rinse in alcohol and repeat.
* Let it air dry for a day.
* Re-assemble and hope for the best.

You should also consider getting a new battery if it has swollen. Resist the temptation to !$$&*/pop it to let the gas out. A compromised Li-ion battery is a fire hazard. If the device appears to power up but behaves erratically, then use a tool like 3uTools to flash the firmware as it may be corrupted.

A professional repair shop that does water damage repair may be able to recover your phone or the data because they have access to pro-level ultrasonic baths and specialized cleaners as well as the skills to troubleshoot your board. Many shops have a no fix/no fee policy so you don't have to spend money to find out if the phone is fixable or not.

Статус:

open