Перейти к основному содержанию
Помощь

Текущая версия: Jimfixer ,

Название:

Looking for a little help

Текст:

Im rebuilding the wire speed control on my small welder and am wondering if anyone knows where i can find a three terminal rotary rheostat 115 volt 250vac 40 amp . The company I bought the welder from is in Italy and no longer has any dealers in my area and when i contacted the company they said they wont sell parts to end users . The web site they sent is all in Italian  . Got a friend to translate for me and even hes not sure how to get what I need . I've gone over the cuircit board and am pretty certain the problem is in the rheostat. @oldturkey03  Mike im kinda directing this in your direction but will take help from anyone Im just not finding anything

'''Update'''

The welder is a Deca 150e Its a portable welder I use at job sites without 220 outlets as this runs off 110

[image|1294361]

[image|1294362]

[image|1294366]

I have my thumb on the rheostat it measures 1 1/4"by 3/4wide

size doesnt really mater as I can adapt to most any size .

Just to let you know what I've tried . I replaced the entire board with a model train controller that worked great on low settings but burned out on the high setting . I've also tried a dimmer switch with similar results

Устройство:

Welder

Статус:

open

Принятый ответ:

+446363

Отредактировано: Aiden ,

Название:

Looking for a little help

Текст:

-Im rebuilding the wire speed control on my small welder and am wondering if anyone knows where i can find a three terminal rotary rheostat 115 volt 250vac 40 amp . The company I bought the welder from is in Italy and no longer has any dealers in my area and when i contacted the company they said they wont sell parts to end users . The web site they sent is all in Italian . Got a friend to translate for me and even hes not sure how to get what I need . I've gone over the cuircit board and am pretty certain the problem is in the rheostat. @oldturkey03 Mike im kinda directing this in your direction but will take help from anyone Im just not finding anything
+Im rebuilding the wire speed control on my small welder and am wondering if anyone knows where i can find a three terminal rotary rheostat 115 volt 250vac 40 amp . The company I bought the welder from is in Italy and no longer has any dealers in my area and when i contacted the company they said they wont sell parts to end users . The web site they sent is all in Italian . Got a friend to translate for me and even hes not sure how to get what I need . I've gone over the cuircit board and am pretty certain the problem is in the rheostat. @oldturkey03 Mike im kinda directing this in your direction but will take help from anyone Im just not finding anything
+
'''Update'''
+
The welder is a Deca 150e Its a portable welder I use at job sites without 220 outlets as this runs off 110
+
[image|1294361]
+
[image|1294362]
+
[image|1294366]
+
I have my thumb on the rheostat it measures 1 1/4"by 3/4wide
-size doesnt really mater as I can adapt to most any size .
+
+size doesnt really mater as I can adapt to most any size .
+
Just to let you know what I've tried . I replaced the entire board with a model train controller that worked great on low settings but burned out on the high setting . I've also tried a dimmer switch with similar results

Устройство:

-Wire
+Welder

Статус:

open

Отредактировано: Jimfixer ,

Название:

Looking for a little help

Текст:

-Im rebuilding the wire speed control on my small welder and am wondering if anyone knows where i can find a three terminal rotary rheostat 115 volt 250vac 40 amp . The company I bought the welder from is in Italy and no longer has any dealers in my area and when i contacted the company they said they wont sell parts to end users . The web site they sent is all in Italian . Got a friend to translate for me and even hes not sure how to get what I need . I've gone over the cuircit board and am pretty certain the problem is in the rheostat. @oldturkey03 Mike im kinda directing this in your direction but will take help from anyone Im just not finding anything
+Im rebuilding the wire speed control on my small welder and am wondering if anyone knows where i can find a three terminal rotary rheostat 115 volt 250vac 40 amp . The company I bought the welder from is in Italy and no longer has any dealers in my area and when i contacted the company they said they wont sell parts to end users . The web site they sent is all in Italian . Got a friend to translate for me and even hes not sure how to get what I need . I've gone over the cuircit board and am pretty certain the problem is in the rheostat. @oldturkey03 Mike im kinda directing this in your direction but will take help from anyone Im just not finding anything
+'''Update'''
+The welder is a Deca 150e Its a portable welder I use at job sites without 220 outlets as this runs off 110
+[image|1294361]
+[image|1294362]
+[image|1294366]
+I have my thumb on the rheostat it measures 1 1/4"by 3/4wide
+size doesnt really mater as I can adapt to most any size .
+Just to let you know what I've tried . I replaced the entire board with a model train controller that worked great on low settings but burned out on the high setting . I've also tried a dimmer switch with similar results

Устройство:

Wire

Статус:

open

Оригинальный сообщение: Jimfixer ,

Название:

Looking for a little help

Текст:

Im rebuilding the wire speed control on my small welder and am wondering if anyone knows where i can find a three terminal rotary rheostat 115 volt 250vac 40 amp . The company I bought the welder from is in Italy and no longer has any dealers in my area and when i contacted the company they said they wont sell parts to end users . The web site they sent is all in Italian  . Got a friend to translate for me and even hes not sure how to get what I need . I've gone over the cuircit board and am pretty certain the problem is in the rheostat. @oldturkey03  Mike im kinda directing this in your direction but will take help from anyone Im just not finding anything

Устройство:

Wire

Статус:

open