Перейти к основному содержанию
Помощь

Текущая версия: Nick ,

Название:

What is causing the printer to squeak while printing? *With video*

Текст:

[video|1099]

I have an HP M401n here that I have had for ~3 years or so. As of today the printer began squeaking during a print job. I specifically hear this squeak a little bit while paper is being picked up (Tray 1 and Tray 2). This prominently happens during the fusing stage of the process, but is also present during paper pickup.

I have tried the following things:

* 7 page test run with the original HP 80A (very low state) with squeaking issues.
* 7 page test run with the same test document as the original HP 80A using a V4ink 80X toner. This toner also squeaked.
* Used Tray 1 and Tray 2 for both the original HP 80A toner and the V4Ink 80X. Both trays squeak.

Since this issue is reproduced on both cartridges, it's likely a printer fault. When I got the V4ink toner the 2 pack wasn't much more with a lower cost per toner. Because of that, I ended up getting the 2 pack. I am willing to use the other V4Ink toner in the 2 back I bought for testing, but this isn't ideal since open HP toner is hard to store.

== Update ==

Due to a small intermittent leak (along with the squeak), I changed the toner cartridge with my 2nd unit. The printer still squeaks.

I have now checked the MP tray gears to see if that had any obvious wear - it does not, nor do I see anything serious wrong.

Устройство:

LaserJet Pro 400 M401n

Статус:

open

Принятый ответ:

469204

Отредактировано: Nick ,

Название:

What is causing the printer to squeak while printing? *With video*

Текст:

[video|1099]
 
I have an HP M401n here that I have had for ~4~3 years or so. As of today the printer began squeaking during a print job. I specifically hear this squeak a little bit while paper is being picked up (Tray 1 and Tray 2). This prominently happens during the fusing stage of the process, but is also present during paper pickup.
I have an HP M401n here that I have had for ~4~3 years or so. As of today the printer began squeaking during a print job. I specifically hear this squeak a little bit while paper is being picked up (Tray 1 and Tray 2). This prominently happens during the fusing stage of the process, but is also present during paper pickup.
 
I have tried the following things:
 
* 7 page test run with the original HP 80A (very low state) with squeaking issues.
* 7 page test run with the same test document as the original HP 80A using a V4ink 80X toner. This toner also squeaked.
* Used Tray 1 and Tray 2 for both the original HP 80A toner and the V4Ink 80X. Both trays squeak.
 
Since this issue is reproduced on both cartridges, it's likely a printer fault. When I got the V4ink toner the 2 pack wasn't much more with a lower cost per toner. Because of that, I ended up getting the 2 pack. I am willing to use the other V4Ink toner in the 2 back I bought for testing, but this isn't ideal since open HP toner is hard to store.
 
== Update ==
 
Due to a small intermittent leak (along with the squeak), I changed the toner cartridge with my 2nd unit. The printer still squeaks.
 
I have now checked the MP tray gears to see if that had any obvious wear - it does not, nor do I see anything serious wrong.

Устройство:

LaserJet Pro 400 M401n

Статус:

open

Отредактировано: Nick ,

Название:

What is causing the printer to squeak while printing? *With video*

Текст:

[video|1099]
 
I have an HP M401n here that I have had for ~4 years or so. As of today the printer began squeaking during a print job. I specifically hear this squeak a little bit while paper is being picked up (Tray 1 and Tray 2). This prominently happens during the fusing stage of the process, but is also present during paper pickup.
 
I have tried the following things:
 
* 7 page test run with the original HP 80A (very low state) with squeaking issues.
* 7 page test run with the same test document as the original HP 80A using a V4ink 80X toner. This toner also squeaked.
* Used Tray 1 and Tray 2 for both the original HP 80A toner and the V4Ink 80X. Both trays squeak.
 
Since this issue is reproduced on both cartridges, it's likely a printer fault. When I got the V4ink toner the 2 pack wasn't much more with a lower cost per toner. Because of that, I ended up getting the 2 pack. I am willing to use the other V4Ink toner in the 2 back I bought for testing, but this isn't ideal since open HP toner is hard to store.
 
== Update ==
 
Due to a small intermittent leak (along with the squeak), I changed the toner cartridge with my 2nd unit. The printer still squeaks.
I have now checked the MP tray gears to see if that had any obvious wear - it does not, nor do I see anything serious wrong.

Устройство:

LaserJet Pro 400 M401n

Статус:

open

Отредактировано: Nick ,

Название:

What is causing the printer to squeak while printing? *With video*

Текст:

[video|1099]
 
I have an HP M401n here that I have had for ~4 years or so. As of today the printer began squeaking during a print job. I specifically hear this squeak a little bit while paper is being picked up (Tray 1 and Tray 2), but it prominently2). This prominently happens during the fusing stage of the process andprocess, but is the most obnoxious at this pointalso present during paper pickup.
I have an HP M401n here that I have had for ~4 years or so. As of today the printer began squeaking during a print job. I specifically hear this squeak a little bit while paper is being picked up (Tray 1 and Tray 2), but it prominently2). This prominently happens during the fusing stage of the process andprocess, but is the most obnoxious at this pointalso present during paper pickup.
 
I have tried the following things:
 
* 7 page test run with the original HP 80A (very low state) with squeaking issues.
* 7 page test run with the same test document as the original HP 80A using a V4ink 80X toner. This toner also squeaked.
* Used Tray 1 and Tray 2 for both the original HP 80A toner and the V4Ink 80X. Both trays squeak.
 
Since this issue is reproduced on both cartridges, it's likely a fault of the printerprinter fault. When I got the V4ink toner the 2 pack wasn't much more and thewith a lower cost per toner was lower sotoner. Because of that, I ended up getting the 2 pack (even though I only needed one)pack. I am willing to use the other V4Ink toner in the 2 back I bought for testing, but I don't want to do this if I do not have to;isn't ideal since open HP toner is hard to store without having leak issues and needs special masking.store.
Since this issue is reproduced on both cartridges, it's likely a fault of the printerprinter fault. When I got the V4ink toner the 2 pack wasn't much more and thewith a lower cost per toner was lower sotoner. Because of that, I ended up getting the 2 pack (even though I only needed one)pack. I am willing to use the other V4Ink toner in the 2 back I bought for testing, but I don't want to do this if I do not have to;isn't ideal since open HP toner is hard to store without having leak issues and needs special masking.store.
== Update ==
 
Due to a small intermittent leak (along with the squeak), I changed the toner cartridge with my 2nd unit. The printer still squeaks.

Устройство:

LaserJet Pro 400 M401n

Статус:

open

Отредактировано: Nick ,

Название:

What is causing the printer to squeak while printing? *With video*

Текст:

[video|1099]
 
I have an HP M401n here that I have had for ~4 years or so. As of today the printer began squeaking during a print job. I specifically hear this squeak a little bit while paper is being picked up (Tray 1 and Tray 2), but it prominently happens during the fusing stage of the process and is the most obnoxious at this point.
 
I have tried the following things:
 
* 7 page test run with the original HP 80A (very low state) with squeaking issues.
* 7 page test run with the same test document as the original HP 80A using a V4ink 80X toner. This toner also squeaked.
* Used Tray 1 and Tray 2 for both the original HP 80A toner and the V4Ink 80X. Both trays squeak.
 
Since this issue is reproduced on both cartridges, it's likely a fault of the printer. When I got the V4ink toner the 2 pack wasn't much more and the cost per toner was lower so I ended up getting the 2 pack (even though I only needed one). I am willing to use the other V4Ink toner in the 2 back I bought for testing, but I don't want to do this if I do not have to; open HP toner is hard to store without having leak issues and needs special masking.
== Update ==
Due to a small intermittent leak (along with the squeak), I changed the toner cartridge with my 2nd unit. The printer still squeaks.

Устройство:

LaserJet Pro 400 M401n

Статус:

open

Отредактировано: Nick ,

Название:

What is causing the printer to squeak while printing? *With video*
What is causing the printer to squeak while printing? *With video*

Текст:

[video|1099]
 
I have an HP M401n here that I have had for ~4 years or so. As of today the printer began squeaking during a print job. I specifically hear this squeak a little bit while paper is being picked up (Tray 1 and Tray 2), but it prominently happens during the fusing stage of the process and is the most obnoxious at this point.
 
I have tried the following things:
 
* 7 page test run with the original HP 80A (very low state) with squeaking issues.
* 7 page test run with the same test document as the original HP 80A using a V4ink 80X toner. This toner also squeaked.
* Used Tray 1 and Tray 2 for both the original HP 80A toner and the V4Ink 80X. Both trays squeak.
 
Since this issue is reproduced on both cartridges, it's likely a fault of the printer. When I got the V4ink toner the 2 pack wasn't much more and the cost per toner was lower so I ended up getting the 2 pack (even though I only needed one). I am willing to use the other V4Ink toner in the 2 back I bought for testing, but I don't want to do this if I do not have to; open HP toner is hard to store without having leak issues and needs special masking.

Устройство:

LaserJet Pro 400 M401n

Статус:

open

Отредактировано: Nick ,

Название:

What is causing the printer to squeak while printing?

Текст:

[video|1099]
I have an HP M401n here that I have had for ~4 years or so. As of today the printer began squeaking during a print job. I specifically hear this squeak a little bit while paper is being picked up (Tray 1 and Tray 2), but it prominently happens during the fusing stage of the process and is the most obnoxious at this point.
 
I have tried the following things:
 
* 7 page test run with the original HP 80A (very low state) with squeaking issues.
* 7 page test run with the same test document as the original HP 80A using a V4ink 80X toner. This toner also squeaked.
* Used Tray 1 and Tray 2 for both the original HP 80A toner and the V4Ink 80X. Both trays squeak.
 
Since this issue is reproduced on both cartridges, it's likely a fault of the printer. When I got the V4ink toner the 2 pack wasn't much more and the cost per toner was lower so I ended up getting the 2 pack (even though I only needed one). I am willing to use the other V4Ink toner in the 2 back I bought for testing, but I don't want to do this if I do not have to; open HP toner is hard to store without having leak issues and needs special masking.

Устройство:

LaserJet Pro 400 M401n

Статус:

open

Оригинальный сообщение: Nick ,

Название:

What is causing the printer to squeak while printing?

Текст:

I have an HP M401n here that I have had for ~4 years or so. As of today the printer began squeaking during a print job. I specifically hear this squeak a little bit while paper is being picked up (Tray 1 and Tray 2), but it prominently happens during the fusing stage of the process and is the most obnoxious at this point.

I have tried the following things:

* 7 page test run with the original HP 80A (very low state) with squeaking issues.
* 7 page test run with the same test document as the original HP 80A using a V4ink 80X toner. This toner also squeaked.
* Used Tray 1 and Tray 2 for both the original HP 80A toner and the V4Ink 80X. Both trays squeak.

Since this issue is reproduced on both cartridges, it's likely a fault of the printer. When I got the V4ink toner the 2 pack wasn't much more and the cost per toner was lower so I ended up getting the 2 pack (even though I only needed one). I am willing to use the other V4Ink toner in the 2 back I bought for testing, but I don't want to do this if I do not have to; open HP toner is hard to store without having leak issues and needs special masking.

Устройство:

LaserJet Pro 400 M401n

Статус:

open