Skip to main content
Помощь

Оригинальный сообщение: Boyd Lewis ,

Текст:

If you changed the dampeners, that should have corrected any support issues for the whole outer tub. Top spring issues are extremely rare.

The first thing I would check for a whining sound/balance issue would be the rotor in the back. Looking at the washer from behind the back panel - there is one bolt in the center that holds the rotor in place. This can back out slightly from torque over time, and needs to be wrench and hammer/impact drill tight.

If that isn’t it - you’re looking at bearing issues, most likely.

Статус:

open