Перейти к основному содержанию

Оригинальный сообщение: Richard ,


When water is spilled on a board you can not simply dry it out.  The water does evaporate but leaves behind residue and corrodes parts - often not visible without a microscope.  You have to clean it to get it to work properly provided the damage is minimal.  Sometimes the water will damage parts that leave the device unusable without board repair/replacement.

As mentioned by @mdrecovery you can try to use alcohol.  Your best option is to find someone with an ultrasonic cleaner.  I agree you can remove the removable parts (which should be obvious) but do not pry or pull on anything that is soldered.