Перейти к основному содержанию
Помощь

Текущая версия: facebook ,

Текст:

I have exactly the same problem and tried already the last three firmware versions. Right now I have version 20180318 installed.
 
My settings:
 
Shut down after: Never
 
Sleep/Auto off after: 1 hour
 
Wake up on:
 
x USB
 
x LAN
 
x touch panel
 
When the printer goes into sleep mode (which obviously can't be deactivated in the settings) the power button is blinking as it should do - but no print job via LAN can wake up the printer. Even pressing the power button so that the display is on and the button constantly glows changes nothing: Windows can't print and shows the printer as "offline". Interestingly sending a print job from my iPad via AirPrint wakes up the printer without any problems!
 
For LAN print jobs I first have to switch the printer off and on again befor I can print...
 
Any more hints what to do to solve this?
 
Regards, Holger
 
 
 
UPDATE:
 
It's me once again.
 
Reducing the network speed to 100 Mbit/s half duplex really solved the problem!
 
Printer wake now up on every print job from my PC or Laptop!
 
Switching back to 1000 Mbit/s brings back the wake-up-from-sleep issue again!

Статус:

open

Отредактировано: facebook ,

Текст:

I have exactly the same problem and tried already the last three firmware versions. Right now I have version 20180318 installed.
 
My settings:
 
Shut down after: Never
 
Sleep/Auto off after: 1 hour
 
Wake up on:
 
x USB
 
x LAN
 
x touch panel
 
When the printer goes into sleep mode (which obviously can't be deactivated in the settings) the power button is blinking as it should do - but no print job via LAN can wake up the printer. Even pressing the power button so that the display is on and the button constantly glows changes nothing: Windows can't print and shows the printer as "offline". Interestingly sending a print job from my iPad via AirPrint wakes up the printer without any problems!
 
For LAN print jobs I first have to switch the printer off and on again befor I can print...
Any
Any
more hints what to do to solve tthisthis?
Any
Any
more hints what to do to solve tthisthis?
 
Regards, Holger

Статус:

open

Отредактировано: facebook ,

Текст:

I have exactly the same problem and tried already the last three firmware versions. Right now I have version 20180318 installed.
 
My settings:
 
Shut down after: Never
 
Sleep/Auto off after: 1 hour
 
Wake up on:
 
x USB
 
x LAN
 
x touch panel
 
When the printer goes into sleep mode (which obviously can't be deactivated in the settings) the power button is blinking as it should do - but no print job via LAN can wake up the printer. Even pressing the power button so that the display is on and the button constantly glows changes nothing: Windows can't print and shows the printer as "offline". Interestingly sending a print job from my iPad via AirPrint wakes up the printer without any problems!
 
For LAN print jobs I first have to switch the printer off and on again befor I can print...
Any more hints what to do to solve tthis?
 
Regards, Holger

Статус:

open

Оригинальный сообщение: facebook ,

Текст:

I have exactly the same problem and tried already the last three firmware versions. Right now I have version 20180318 installed.

My settings:

Shut down after: Never

Sleep/Auto off after: 1 hour

Wake up on:

x USB

x LAN

x touch panel

When the printer goes into sleep mode (which obviously can't be deactivated in the settings) the power button is blinking as it should do - but no print job via LAN can wake up the printer. Even pressing the power button so that the display is on and the button constantly glows changes nothing: Windows can't print and shows the printer as "offline". Interestingly sending a print job from my iPad via AirPrint wakes up the printer without any problems!

For LAN print jobs I first have to switch the printer off and on again befor I can print...

Статус:

open