Перейти к основному содержанию
Помощь

Текущая версия: Dan ,

Текст:

A hot plate would be too hot and not focused enough. All you’ll you do is damage the LCD from the excessive heat.
Use a heat gun or a hair dryer to soften the adhesive along the edges. Using the techniques outlined in this guide: [guide|110591] you should be able to lift the cover glass (if the cover glass is intact you can forgo the tape)
'''No solvents needed here!'''
+
+Wear eyeglasses with side shields and proper gloves.

Статус:

open

Оригинальный сообщение: Dan ,

Текст:

A hot plate would be too hot and not focused enough. All you’ll you do is damage the LCD from the excessive heat.

Use a heat gun or a hair dryer to soften the adhesive along the edges. Using the techniques outlined in this guide: [guide|110591] you should be able to lift the cover glass (if the cover glass is intact you can forgo the tape)

'''No solvents needed here!'''

Статус:

open