Перейти к основному содержанию
Помощь

Текущая версия: Lulzigi ,

Название:

Size for replacement screws

Текст:

So, my roommate got a small amount of water in my Switch Pro Controller. I’ve opened it up to clean it before, so I didn’t get too mad. I’m usually very careful when doing these types of things, but when I was putting the controller back together after blotting the insides dry, I find that I’m missing a screw! I’ve looked everywhere and I can’t find it. I also don’t know how to figure out the size of the replacement.
 
The furthest screw to the right is the kind that I need another of. The screwdriver is pointing at where it goes.
 
[image|1694323] [image|1694809]
[image|1694323] [image|1694809]
 
It’s about 7mm long, 3mm wide at the head, about 1.5mm at the shaft, and it’s a regular philips head.

Устройство:

Switch Pro Controller

Статус:

open

Отредактировано: Lulzigi ,

Название:

Size for replacement screws

Текст:

So, my roommate got a small amount of water in my Switch Pro Controller. I’ve opened it up to clean it before, so I didn’t get too mad. I’m usually very careful when doing these types of things, but when I was putting the controller back together after blotting the insides dry, I find that I’m missing a screw! I’ve looked everywhere and I can’t find it. I also don’t know how to figure out the size of the replacement.
 
The furthest screw to the right is the kind that I need another of. The screwdriver is pointing at where it goes.
 
[image|1694323]
 
It’s about 7mm long, 3mm wide at the head, and aboutabout 1.5mm at the shaftshaft, and it’s a regular philips head.
It’s about 7mm long, 3mm wide at the head, and aboutabout 1.5mm at the shaftshaft, and it’s a regular philips head.

Устройство:

Switch Pro Controller

Статус:

open

Оригинальный сообщение: Lulzigi ,

Название:

Size for replacement screws

Текст:

So, my roommate got a small amount of water in my Switch Pro Controller. I’ve opened it up to clean it before, so I didn’t get too mad. I’m usually very careful when doing these types of things, but when I was putting the controller back together after blotting the insides dry, I find that I’m missing a screw! I’ve looked everywhere and I can’t find it. I also don’t know how to figure out the size of the replacement.

The furthest screw to the right is the kind that I need another of. The screwdriver is pointing at where it goes.

[image|1694323]

It’s about 7mm long, 3mm wide at the head, and about 1.5mm at the shaft.

Устройство:

Switch Pro Controller

Статус:

open