Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Помощь

Оригинальный сообщение: Mckenna Hand ,

Текст:

They often time have problems fitting. You can try to gently peel out the plastic pieces and put them over the square sensors first. The only issue I’ve seen with that is taking those out might cause a scratch on the color paint and it will be visible from the front of the screen. If you try that, use a plastic/nylon spudger to pry those pieces off.  Sometimes it just takes some jiggling those square pieces around until you get them in. You may have to push firmly to get them in.

Статус:

open