Перейти к основному содержанию
Помощь

Текущая версия: Raymond Rozman ,

Название:

My IFixit replacement battery is not recognized, even after SMC reset

Текст:

-I recently installed an iFixit battery in my mid2009 MacBookPro 13” unibody. The battery worked fine for a while, but now the laptop cannot draw from battery power at all.
+[image|2186867]I recently installed an iFixit battery in my mid2009 MacBookPro 13” unibody. The battery worked fine for a while, but now the laptop cannot draw from battery power at all.
I tried resetting SMC and PVRAM, but the laptop still shuts down hard when the power cable is pulled. System report for Power shows:
Charge info:
* charge remaining (mAh): 5000
* fully charged: yes
* charging: no
* full charge capacity: 5000
* health info:
* cycle count: 27
* condition: replace now
* batt installed: yes
* amperage: 0
* voltage: 7000
How do I get this battery working again?

Устройство:

MacBook Pro 13" Unibody Mid 2009

Статус:

open

Отредактировано: Dan ,

Название:

My IFixit replacement battery is not recognized, even after SMC reset

Текст:

I recently installed an iFixit battery in my mid2009 MacBookPro 13” unibody. The battery worked fine for a while, but now the laptop cannot draw from battery power at all.
I tried resetting SMC and PVRAM, but the laptop still shuts down hard when the power cable is pulled. System report for Power shows:
-charge info:
+Charge info:
-charge remaining (mAh): 5000
-
-fully charged: yes
-
-charging: no
-
-full charge capacity: 5000
-
-health info:
-
-cycle count: 27
-
-condition: replace now
-
-batt installed: yes
-
-amperage: 0
-
-voltage: 7000
-
+* charge remaining (mAh): 5000
+* fully charged: yes
+* charging: no
+* full charge capacity: 5000
+* health info:
+* cycle count: 27
+* condition: replace now
+* batt installed: yes
+* amperage: 0
+* voltage: 7000
How do I get this battery working again?

Устройство:

MacBook Pro 13" Unibody Mid 2009

Статус:

open

Оригинальный сообщение: Raymond Rozman ,

Название:

My IFixit replacement battery is not recognized, even after SMC reset

Текст:

I recently installed an iFixit battery in my mid2009 MacBookPro 13” unibody. The battery worked fine for a while, but now the laptop cannot draw from battery power at all.

I tried resetting SMC and PVRAM, but the laptop still shuts down hard when the power cable is pulled. System report for Power shows:

charge info:

charge remaining (mAh): 5000

fully charged: yes

charging: no

full charge capacity: 5000

health info:

cycle count: 27

condition: replace now

batt installed: yes

amperage: 0

voltage: 7000

How do I get this battery working again?

Устройство:

MacBook Pro 13" Unibody Mid 2009

Статус:

open