Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Помощь

Текущая версия: Brock Tillma ,

Текст:

I’m having this same issue and can’t seem to find a solution. Any advice out there?
 
EDIT:
 
Problem solved!! InOn the back side of the digitizer there are two very small electronic components just to the right of the home button that were shorting out on the aluminum casing. I found it by using a metal tool (i was previously using plastic) to poke around until i made it happen again.
Problem solved!! InOn the back side of the digitizer there are two very small electronic components just to the right of the home button that were shorting out on the aluminum casing. I found it by using a metal tool (i was previously using plastic) to poke around until i made it happen again.
 
My solution was to cut a piece of the blue film backing from the adhesive strips and tape it over these parts with clear scotch tape.
 
I hope this helped somebody! Let us know in the comments.
 
-B

Статус:

open

Отредактировано: Brock Tillma ,

Текст:

I’m having this same issue and can’t seem to find a solution. Any advice out there?
 
EDIT:
 
Problem solved!! In the back side of the digitizer there are two very small electronic components just to the right of the home button that were shorting out on the aluminum casing. I found it by using a metal tool (i was previously using plastic) to poke around until i made it happen again.
 
My solution was to cut a piece of the blue film backing from the adhesive strips and tape it over these parts with clear scotch tape.
 
I hope this helped somebody! Let us know in the comments.
 
-B

Статус:

open

Оригинальный сообщение: Brock Tillma ,

Текст:

I’m having this same issue and can’t seem to find a solution. Any advice out there?

Статус:

open