Перейти к основному содержанию
Помощь

Текущая версия: Marvin Arand ,

Название:

Can't connect to computer with Data cable

Текст:

Hi

I currently have two PSP Go’s and both are not connecting with my (pretty old) laptop, one has CFW 6.61 PRO-C∞ and the other still has the OFW 6.61. It just says Please Wait the whole time unless I connect it to a power outlet, where it says that I should connect the PSP to a PC or a PS3 with this cable. I also had the one with CFW already connected to my computer, which is how I put the CFW on there and how I modded it. I just haven’t used it in a while and now it just doesn’t connect with the computer anymore.

I currently also don’t have a way of testing it on another computer.

I have disabled the “USB Charge” setting, which the PSP recommends to draw less current, but to no avail.

I also don’t have any memory card in either of the PSP’s, So I can’t even use that to transfer stuff to the internal memory of the PSP later using a File manager that I installed.

It might be the cable, which would be a bummer, would have to order a new one online, but in the same time I’m not sure about that. It might also be the computer, but I also can’t find anything popping up in the Device Manager, so that I could update/reinstall the driver and I haven’t had any issue connecting anything else to my computer.

[EDIT] since the one with the CFW had some other issues, screen would often not turn on, I ended up tearing the two PSPs completely down and also modifying them by mix and matching the panels and switching the screen on the one with the CFW. The connection between computer and PSP still doesn’t work. At this point it must be the Computer or the Cable. I will check it on another computer this week to see if that changes anything.

Thanks!

Устройство:

PSP Go

Статус:

open

Принятый ответ:

-680476

Отредактировано: Marvin Arand ,

Название:

Can't connect to computer with Data cable

Текст:

Hi

I currently have two PSP Go’s and both are not connecting with my (pretty old) laptop, one has CFW 6.61 PRO-C∞ and the other still has the OFW 6.61. It just says Please Wait the whole time unless I connect it to a power outlet, where it says that I should connect the PSP to a PC or a PS3 with this cable. I also had the one with CFW already connected to my computer, which is how I put the CFW on there and how I modded it. I just haven’t used it in a while and now it just doesn’t connect with the computer anymore.

I currently also don’t have a way of testing it on another computer.

I have disabled the “USB Charge” setting, which the PSP recommends to draw less current, but to no avail.

I also don’t have any memory card in either of the PSP’s, So I can’t even use that to transfer stuff to the internal memory of the PSP later using a File manager that I installed.

It might be the cable, which would be a bummer, would have to order a new one online, but in the same time I’m not sure about that. It might also be the computer, but I also can’t find anything popping up in the Device Manager, so that I could update/reinstall the driver and I haven’t had any issue connecting anything else to my computer.

[EDIT] since the one with the CFW had some other issues, screen would often not turn on, I ended up tearing the two PSPs completely down and also modifying them by mix and matching the panels and switching the screen on the one with the CFW. The connection between computer and PSP still doesn’t work. At this point it must be the Computer or the Cable. I will check it on another computer this week to see if that changes anything.

Thanks!

Устройство:

PSP Go

Статус:

open

Принятый ответ:

+680476

Отредактировано: Marvin Arand ,

Название:

Can't connect to computer with Data cable

Текст:

Hi
-I currently have two PSP Go’s and both are not connecting with my (pretty old) laptop, one has CFW 6.61 PRO-C∞ and the other still has the OFW 6.61. It just says Please Wait the whole time. I also had the one with CFW already connected to my computer, which is how I put the CFW on there and how I modded it. I just haven’t used it in a while and now it just doesn’t connect with the computer anymore.
+I currently have two PSP Go’s and both are not connecting with my (pretty old) laptop, one has CFW 6.61 PRO-C∞ and the other still has the OFW 6.61. It just says Please Wait the whole time unless I connect it to a power outlet, where it says that I should connect the PSP to a PC or a PS3 with this cable. I also had the one with CFW already connected to my computer, which is how I put the CFW on there and how I modded it. I just haven’t used it in a while and now it just doesn’t connect with the computer anymore.
I currently also don’t have a way of testing it on another computer.
-I have disabled the “USB Charge” setting, which the PSP recommends to draw less current, but with no avail.
-
-The PSP’s actually detect that it is a Data cable, wasn’t sure for a little if it actually is my Data+charging cable or a just charging one, which I had and sold already a while ago, so anyway, they both will automatically change to the “USB Connection” mode if I connect them to a USB Port, and if the “USB Auto Connect” setting is enabled.
+I have disabled the “USB Charge” setting, which the PSP recommends to draw less current, but to no avail.
I also don’t have any memory card in either of the PSP’s, So I can’t even use that to transfer stuff to the internal memory of the PSP later using a File manager that I installed.
It might be the cable, which would be a bummer, would have to order a new one online, but in the same time I’m not sure about that. It might also be the computer, but I also can’t find anything popping up in the Device Manager, so that I could update/reinstall the driver and I haven’t had any issue connecting anything else to my computer.
+
+[EDIT] since the one with the CFW had some other issues, screen would often not turn on, I ended up tearing the two PSPs completely down and also modifying them by mix and matching the panels and switching the screen on the one with the CFW. The connection between computer and PSP still doesn’t work. At this point it must be the Computer or the Cable. I will check it on another computer this week to see if that changes anything.
Thanks!

Устройство:

PSP Go

Статус:

open

Отредактировано: Marvin Arand ,

Название:

Can't connect to computer with Data cable

Текст:

Hi
-I currently have two PSP Go’s and both are not connecting with my (pretty old) laptop, one has CFW 6.61 PRO-C∞ and the other still has the OFW 6.61.[br]
+I currently have two PSP Go’s and both are not connecting with my (pretty old) laptop, one has CFW 6.61 PRO-C∞ and the other still has the OFW 6.61. It just says Please Wait the whole time. I also had the one with CFW already connected to my computer, which is how I put the CFW on there and how I modded it. I just haven’t used it in a while and now it just doesn’t connect with the computer anymore.
I currently also don’t have a way of testing it on another computer.
I have disabled the “USB Charge” setting, which the PSP recommends to draw less current, but with no avail.
-The PSP’s actually detect the difference when I connect them to a Computer vs a USB charger, so they will automatically change to the “USB Connection” mode if I connect them to my computer, and if the “USB Auto Connect” setting is enabled. If I just connect it to my USB Outlet charging adapter it just starts charging and doesn’t change menus.
+The PSP’s actually detect that it is a Data cable, wasn’t sure for a little if it actually is my Data+charging cable or a just charging one, which I had and sold already a while ago, so anyway, they both will automatically change to the “USB Connection” mode if I connect them to a USB Port, and if the “USB Auto Connect” setting is enabled.
-I also don’t have any memory card in either of the PSP’s, So I can’t even use that to transfer stuff to the internal memory of the PSP.
+I also don’t have any memory card in either of the PSP’s, So I can’t even use that to transfer stuff to the internal memory of the PSP later using a File manager that I installed.
It might be the cable, which would be a bummer, would have to order a new one online, but in the same time I’m not sure about that. It might also be the computer, but I also can’t find anything popping up in the Device Manager, so that I could update/reinstall the driver and I haven’t had any issue connecting anything else to my computer.
Thanks!

Устройство:

PSP Go

Статус:

open

Оригинальный сообщение: Marvin Arand ,

Название:

Can't connect to computer with Data cable

Текст:

Hi

I currently have two PSP Go’s and both are not connecting with my (pretty old) laptop, one has CFW 6.61 PRO-C∞ and the other still has the OFW 6.61.[br]

I currently also don’t have a way of testing it on another computer.

I have disabled the “USB Charge” setting, which the PSP recommends to draw less current, but with no avail.

The PSP’s actually detect the difference when I connect them to a Computer vs a USB charger, so they will automatically change to the “USB Connection” mode if I connect them to my computer, and if the “USB Auto Connect” setting is enabled. If I just connect it to my USB Outlet charging adapter it just starts charging and doesn’t change menus.

I also don’t have any memory card in either of the PSP’s, So I can’t even use that to transfer stuff to the internal memory of the PSP.

It might be the cable, which would be a bummer, would have to order a new one online, but in the same time I’m not sure about that. It might also be the computer, but I also can’t find anything popping up in the Device Manager, so that I could update/reinstall the driver and I haven’t had any issue connecting anything else to my computer.

Thanks!

Устройство:

PSP Go

Статус:

open