Перейти к основному содержанию
Помощь

Текущая версия: Dan ,

Текст:

Nothing difficult other than they are glued in! As you can see here
[image|2366066]
Make sure the speaker comes with a new cut adhesive as you don’t want to use anything else.
Use a heat gun to heat up the grill side just don’t over do it as you don’t want it so hot to melt the keyboard keys or other plastic parts. Just enough to soften the adhesive.
+
+Go slow in lifting after you wedge a screw driver under the lip of the speaker.

Статус:

open

Отредактировано: Dan ,

Текст:

Nothing difficult other than they are glued in! As you can see here
[image|2366066]
Make sure the speaker comes with a new cut adhesive as you don’t want to use anything else.
+
+Use a heat gun to heat up the grill side just don’t over do it as you don’t want it so hot to melt the keyboard keys or other plastic parts. Just enough to soften the adhesive.

Статус:

open

Оригинальный сообщение: Dan ,

Текст:

Nothing difficult other than they are glued in! As you can see here

[image|2366066]

Make sure the speaker comes with a new cut adhesive as you don’t want to use anything else.

Статус:

open