Перейти к основному содержанию

Оригинальный сообщение: Brett Hartt ,


Hey Snowdog,

This is a pretty common problem, and you're correct about the finger oil causing bluetooth to fail.

There are a couple places that you should clean the contacts before re-assembly. While many of connectors in the iPhone use plug-and-socket connections, many just use spring pressure contacts. These pressure contacts are those which you should clean off. Here are a few:

* [guide|4332|Dock Connector Contacts|stepid=15374]
* [guide|5059|Near the vibration motor|stepid=22735] (double check this one, it is likely the culprit)
* [guide|5059|Grounding Pin|stepid=22739]

Use some isopropyl alcohol or some Windex on a Q-tip or microfiber cloth, and you should be golden.

Good luck, and let us know how it turns out.