Перейти к основному содержанию

Model No. A1367 / 8, 16, 32, or 64 GB capacity

913вопросов Показать все
Вопрос закрыт

iPod touch 4th gen speaker replacement

I need help on how to solder the speaker onto the motherboard. Do i solder on the top or bottom. and what wire goes where. This is what i need to know.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
1 Комментарий

Ok guys i need some help i replaced the speaker just like everyone told me but no sound will come from the speaker not even alarms or anything. So please help me oh. The speaker is solder on. Blue being farthest and red being closest.

из

Добавить комментарий

2 Ответов

Наиболее полезный ответ

Anthony, check this answer Loud Speaker replacement guide and on here Where do speaker wires connect?

Был ли этот ответ полезен?

Оценка 1

4 Комментариев:

Oh i didn't even see that haha. Thank you so much

из

Ok well i replaced the speaker perfectly but no music or sound through it please help.

из

You do have sound through the audio jack ? If the audio jack is stuck, believing that you have headphones attached, it will not work.

из

I have sound through the headphone jack but none through the speaker when the headphones are removed

из

Добавить комментарий

speaker leads mapped

I create my own guides on ever note so this should show show where the red and blue wires go when soldering the speaker in place I'm still working on the rest of the guide

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 3,027