Перейти к основному содержанию

Второе поколение iPhone. Модель A1241; 8 или 16 ГБ памяти; с черной или белой задней пластиковой крышкой. Ремонт проще, чем первого iPhone. Требует отвертки и инструментов для вскрытия.

1505 Questions Показать все
Вопрос закрыт

iPhone keep restarting after disassemble

Hi,

I had a question recently due to i need to change my side volume adjustment so i disassemble & after i assemble back my phone start up with apple logo. abt 3 to 5 mins it came out the running cycle behind the logo awhile it restart again.

i had restore with itune was sucess but after a while it repeat again of restarting.

i also did disassemble another iPhone due to changing of battery & assemble back & it same thing happen as above mention,

Is there something wrong with my assemble or is it hardware problem/some parts broken/some parts i did not install properly.

Please help.

Rgds

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

по рейтингу 0
Добавить комментарий

1 Ответ

I would make sure all of the connections are properly seated. It sounds like the logic board is faulty, but it is unlikely that two logic boards were damaged in this same way, which makes me think something is not connected properly.

Был ли этот ответ полезен?

по рейтингу 0
Добавить комментарий
Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 1,871