Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Second generation of CDMA iPad 2 with 16, 32, or 64 GB and Dual Core A5 Processor. Model Number A1397. Repair is detailed and requires heat and prying.

67вопросов Показать все

dropped ipad, bent the alluminium case on the volume bottom

I've just dropped my ipad and the alluminium case bent on the volume button, i cant use the volume button and it stuck inside (volume square is frozen on the sceen). Is it possible to open the ipad and reshape the allumium case or is it too risky?

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 2
Добавить комментарий

2 Ответов

Выбранное решение

Hi Lou,

As you have probably noted, there is no screw to open the iPad 2 and in fact it make opening this iDevice much more complicate that an iPhone for example.

This is the reason why all iPad 2 guides are marked "Very difficult"!

I wouldn't say it is too risky, it depends on you, your skills and probably also your tools. If you want to make a good job you will have to use the good tools. Look at this iOpener at least!

  • If you decide to access the volume button hole from inside the rear case, the minimum require disassemble is the display. Look at this guide so you will have a better view on what you would have to do.
  • Once you will have the screen out, you will have a better view if further dis-assembly is required. Any further dis-assembly should be piece of cake after what you've done just before!
  • Also remember that you're gonna have to re-install the screen with new adhesive strips after that. (New adhesive strips available here.)

Let us know what is your decision, and good luck!

iPad 2 Adhesive Strips Изображение

Продукт

iPad 2 Adhesive Strips

$6.99

iOpener Изображение

Продукт

iOpener

$19.99

iPad 2 CDMA LCD Изображение

Инструкция

iPad 2 CDMA LCD Replacement

Сложность:

Очень сложно

40 minutes - 2 hours

iPad 2 CDMA Front Panel Adhesive Strips Изображение

Инструкция

iPad 2 CDMA Front Panel Adhesive Strips Replacement

Сложность:

Средняя

Был ли этот ответ полезен?

Оценка 2
Добавить комментарий

If the case is bent in the volume control area you can just use pliers to unbend the case. Be careful and use a cloth pad to avoid scaring the case. In my case (pun intended) the thin aluminum above the cutout part of the case was bent and Apple wanted almost as much as a new one to repair it.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Lou будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 3

За последние 30 дней: 10

За всё время: 5,518