Перейти к основному содержанию

13" aluminum unibody, 2.0 or 2.4 GHz Core 2 Duo processor.

573вопросов Показать все
Вопрос закрыт

Testing Hardware, unit won't power on.

So the power cable gives me a green light...sometimes. When it is green, it's steady, but other times I get no light no matter how much I yell at it. And this has been tested with a few cables to make sure the cable itself wasn't faulty. But even when left plugged in, or left to charge overnight, unit will still not power on and boot. I'm looking forward to examining the guts, but I'm a little lost of how and where to start testing hardware. Any ideas of where I should start first?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Наиболее полезный ответ

I would start with the DC-IN board where the magsafe charger hooks up. If you can get your hands on a part i would do a quick swap.

Был ли этот ответ полезен?

Оценка 2

1 Комментарий:

My first thought, too. Might be able to get my hands on one.

из

Добавить комментарий
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 359