Репутация: 9
1
Hi, I have an Iphone 4S that has one certain area of the screen sometimes not responding to touch, the area is "4,5,6" on the keypad when trying to dial a number.
Does anyone have any solve around this?
Thanks,
Mykel
Это хороший вопрос?
Репутация: 5,5к
20
17
12
Yes. You have a broken digitizer, so replace the display assembly.
Был ли этот ответ полезен?
i have repaired over 100 phones, just ran into a problem where a strip of the digitizer is not working. the problem occurs from Q to P on the keyboard in portrait mode. i have an iphone 4 assembeld with no screen and i use it to test screens. the screens i am using work fine with the test phone. upon inspection of the 4/s i see no problem areas. any suggestions? also i tried to hard reset/ and hard restore the phone with no success after updating.
Репутация: 110
9
5
I had a similar problem with a 3gs. I tried a couple of spare screens but could not get rid of the dead spot. A narrow vertical area corresponding with the letter I when the keyboard is on screen. I put the main board under my microscope and found small traces of what looked like solder splashes on two of the pins in the digitizer socket.
Был ли этот ответ полезен?
i put a new digitezer on the phone and still some of the letters don't work in portrait mode , turn the phone in landscape all the keys work ...
Был ли этот ответ полезен?
За последние 24часов: 0
За последние 7 дней: 0
За последние 30 дней: 4
За всё время: 2,310
