No service after screen replacement

Question

iPhone 4S

Пятое поколение iPhone. Ремонт данного устройства простой и требует только отвёрток, лопатки для открытия и терпения. GSM/CDMA / 16, 32 или 64 Гб / Черный или Белый.

2191вопросов Показать все

Logan @logan63565

Репутация: 9

2

Опубликовано: 7 июл 2013 г.

Опции

No service after screen replacement

There is a small component right above the battery connection point. From reading other forms it appears to be an rf testing point. This portion came off when I was prying the batter up. Now I do not have service. I have tried everything the other forms say. leaving it alone for ten minutes, calling out, calling the phone, etc. Is there anyway to reconnect this component? Is it necessary for service or do I have another problem?

Thanks,

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка -1

1 Комментарий

Could you make a detailed picture of the motherboard?

Maybe you could bridge the component with a bit of soldering. Or you could send it to a motherboard repairshop.

8 июл 2013 г. из RenaatS

Добавить комментарий

1 ответ

Выбранное решение

oldturkey03 @oldturkey03

Репутация: 781,5к

1,1к

893

2,3к

Опубликовано: 8 июл 2013 г.

Опции

Logan, that is not a testing point, but a connector. In this case it is a Hirose MS-180 connector. It is available at places like this. Yes you will have to have it and it needs to be soldered back onto the board. Hope this helps, good luck.

Был ли этот ответ полезен?

Да Нет

Оценка 0

2 Комментариев:

Thank you. I've ordered the parts but I underestimated how small of soldering wire I'd need, so I am in search of small diameter solder. Thank you for your help!

13 июл 2013 г. из Logan

Logan, thank you for accepting my answer. If you have not soldered a lot of small components, I would practice on an old board first :-) Good Luck

13 июл 2013 г. из oldturkey03

Добавить комментарий

Could you make a detailed picture of the motherboard?

Maybe you could bridge the component with a bit of soldering. Or you could send it to a motherboard repairshop. — RenaatS
Thank you. I've ordered the parts but I underestimated how small of soldering wire I'd need, so I am in search of small diameter solder. Thank you for your help! — Logan
Logan, thank you for accepting my answer. If you have not soldered a lot of small components, I would practice on an old board first :-) Good Luck — oldturkey03

iPhone 4S

No service after screen replacement

1 ответ

Добавьте свой ответ