Перейти к основному содержанию

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

548вопросов Показать все

Installed HD in iMac - "Select a destination" HD missing?

Hey ifixit

Bought your 2 TB HD for my iMac (EMC 2133) because original HD had crashed. Followed your guide for replacing HD without problems.

Now starting the iMac from disk I come to the "Select a Destination" window but no HD shows up in the list. So I'm stuch here.

Tried the disk utility and the HD does show, but I can't verify or repair it. Seems that nothing can be done with it. No participation showed.

Also tried a trick I read in another threat on apple.com to go into Terminal and type "df -k" a couple of times. No luck.

What do I do?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка -1
1 Комментарий

This question was migrated from http://meta.ifixit.com/Answers.

из

Добавить комментарий

2 Ответов

Наиболее полезный ответ

Sounds like the connections need to be double checked. Go ahead and email support [at] ifixit [dot] com so that we can further assist you. Thanks!

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

Sounds like the drive hasn't been partitioned correctly.

Ensure that the following are correct,

In disk utility Click the Volume not the drive

Click the "Parition" tab

Partition Layout = "1 partition"

Click Options…

Click GUID Partition Table

Click OK

Name the partition "Macintosh HD" or anything you want

Format should be "Mac OS Extended (Journaled)

Click OK

The HDD will now partition and will be available in the "Select a Destination" window.

Let me know how it goes, as always if you need any more help just ask.

Cheers

Brendan Mills

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

Добавьте свой ответ

Timm Willum Larsen будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 237