Diode or transistor fell off.

Question

MacBook Pro 13" Unibody Early 2011

Early 2011 Model: A1278 / 2.3 GHz i5 or 2.7 GHz i7 processor

781вопросов Показать все

Mohammed Afnan @mohammedafnan

Репутация: 11

Опубликовано: 11 сен 2013 г.

Опции

Diode or transistor fell off.

Hello everyone. Let me start by thanking you for your help in advance.

A friend of mine had opened his MacBook for cleaning, and for some reason the part in the yellow circle had fallen off of the motherboard. Now the laptop doesn't even wanna turn on.

Is there anyway someone can tell us the exact number of that diode/transistor? Or if there is anyway it can be bypassed? A picture would be very helpful. Thanks again.

http://tinypic.com/r/2s7x5dy/5

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

3 Комментариев

Here's a better picture of the logic board where the component came from Image from Logic Board Replacement Guide

11 сен 2013 г. из Dan

Mohammed Afnan, by covering up the numbers, you make it difficult to establish exactly what logic board number this is. @Dan, thanks this will help.

11 сен 2013 г. из oldturkey03

Thank you, Dan. It's the one around the right top corner of the RAM with number 330

11 сен 2013 г. из Mohammed Afnan

Добавить комментарий

3 Ответов

Выбранное решение

Dan @danj

Репутация: 479,1к

Self employed contract worker

35

329

971

Опубликовано: 11 сен 2013 г.

Опции

Looking at both your image and the IFIXIT image it appears to be an inductor and labeled 330. Looking at the schematic for this system I do find an inductor L7760 10UH-0.55A-330MOHM.

Был ли этот ответ полезен?

Да Нет

Оценка -1

4 Комментариев:

@Dan, 330 is the 3-digit identification on a surface-mount inductor. It means the figure "33"in Henry's and "0" trailing zero's, hence 33UH. The L7760 would bear the marking "100"

11 сен 2013 г. из oldturkey03

OT - I just copied it from the schematic as it was presented ;-} My EE schooling years ago taught me all about RTL, DTL & TTL logic. Got into CMOS and early SMD stuff on my own & early employment. Today, I mostly swap parts, as most in-house techs do. At home I'll do some simple stuff with an iron.

12 сен 2013 г. из Dan

Dan, no harm no foul. I totally understand what you are saying. all this is just a hobby for me so I try to stay up with all the new developments. Personally I love tubes and "big" components, that small stuff needs all kinds of small tools and meters ;-) expensive hobby.

12 сен 2013 г. из oldturkey03

Gentlemen, thank you so much for your help. I've tried to find the same exact inductor with no luck. What are my options (if any)? Thank you.

13 сен 2013 г. из Mohammed Afnan

Добавить комментарий

Here's a better picture of the logic board where the component came from Image from Logic Board Replacement Guide — Dan
Mohammed Afnan, by covering up the numbers, you make it difficult to establish exactly what logic board number this is. @Dan, thanks this will help. — oldturkey03
Thank you, Dan. It's the one around the right top corner of the RAM with number 330 — Mohammed Afnan
@Dan, 330 is the 3-digit identification on a surface-mount inductor. It means the figure "33"in Henry's and "0" trailing zero's, hence 33UH. The L7760 would bear the marking "100" — oldturkey03
OT - I just copied it from the schematic as it was presented ;-} My EE schooling years ago taught me all about RTL, DTL & TTL logic. Got into CMOS and early SMD stuff on my own & early employment. Today, I mostly swap parts, as most in-house techs do. At home I'll do some simple stuff with an iron. — Dan
Dan, no harm no foul. I totally understand what you are saying. all this is just a hobby for me so I try to stay up with all the new developments. Personally I love tubes and "big" components, that small stuff needs all kinds of small tools and meters ;-) expensive hobby. — oldturkey03
Gentlemen, thank you so much for your help. I've tried to find the same exact inductor with no luck. What are my options (if any)? Thank you. — Mohammed Afnan

oldturkey03 @oldturkey03 Репутация: 782к 1,1к 893 2,3к · Answer 1 · 2013-09-11T16:22:42-07:00

Наиболее полезный ответ

oldturkey03 @oldturkey03

Репутация: 782к

1,1к

893

2,3к

Опубликовано: 11 сен 2013 г.

Опции

Mohammed Afnan, that is reference designator L6995. It is a series D52LC-SM 33UH 20% 0.44A 0.455OHM fixed inductor. Check Jameco.com, Mouser.com or Digikey.com and others for availability.

Был ли этот ответ полезен?

Да Нет

Оценка 2

4 Комментариев:

Thank you oldturkey03 & Dan for taking the the time to look at the images. Where can i find this inductor 330? Or is there anyway i can bypass it? Or any workaround in order for us to get the laptop going? Thanks.

11 сен 2013 г. из Mohammed Afnan

You can not bypass this. it is a "critical" component. Try the above links or any other online electronics place. Depends on where you are located.

11 сен 2013 г. из oldturkey03

Check on here http://uk.mouser.com/Passive-Components/... something like this should work or any of these. Just match the package size closely.

13 сен 2013 г. из oldturkey03

Thank you both for your help. My friend had placed the order last night, and I'll let you know the results.

14 сен 2013 г. из Mohammed Afnan

Добавить комментарий