How do I remove the rear case on a Zeepad FlytouchX Tablet?

Question

Tablet

Инструкции по ремонту большинства планшетов. Из-за их маленького размера и частого использования клея - ремонт планшетов зачастую сложнее чем ремонт ноутбуков

18908вопросов Показать все

Вопрос закрыт

Jay Reynolds @jayreynolds

Репутация: 11

Опубликовано: 8 окт 2013 г.

Опции

How do I remove the rear case on a Zeepad FlytouchX Tablet?

This FlytouchX tablet is the 9.7 inch tablet as seen at this URL = http://www.zeepad.net/flytouch%20X.html

It has two problems:

1. Charge jack needs repaired.

2. The tablet USB connection is not recognized on any of three different notebook PCs. Since USB is faulty I can not update its USB driver.

Any help would be appreciated.

Jay Reynolds

reynoldsj8@outlook.com

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

1 Комментарий

Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas?

Jay Reynolds

9 окт 2013 г. из Jay Reynolds

Добавить комментарий

1 ответ

Выбранное решение

mayer @mayer

Репутация: 685,3к

MacHale Enterprises

3,4к

1,1к

2,6к

Опубликовано: 8 окт 2013 г.

Опции

Here's a video on tearing it down: http://www.youtube.com/watch?v=53lF0XAFY...

Here's how to just take the back off: http://www.androidtablets.net/forum/gome...

Был ли этот ответ полезен?

Да Нет

Оценка 1

3 Комментариев:

Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas? Jay Reynolds

Jay Reynolds, 18 seconds ago

9 окт 2013 г. из Jay Reynolds

Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas? Jay Reynolds Jay Reynolds, 18 seconds ago

10 окт 2013 г. из Jay Reynolds

Sorry! An hour of searching netted me nothing on repairing, teardown or battery replacement.

10 окт 2013 г. из mayer

Добавить комментарий

Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas?

Jay Reynolds — Jay Reynolds
Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas? Jay Reynolds

Jay Reynolds, 18 seconds ago — Jay Reynolds
Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas? Jay Reynolds Jay Reynolds, 18 seconds ago — Jay Reynolds
Sorry! An hour of searching netted me nothing on repairing, teardown or battery replacement. — mayer