Перейти к основному содержанию

Шестое поколение iPhone компании Apple, представленное 12 сентября 2012 года. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 32 или 64 ГБ памяти; в Черном или Белом цвете.

2521вопросов Показать все
Вопрос закрыт

home button doesnt work after multiple fixes

My power button went bad a while ago. when I replaced it, it worked. but then my home button stopped working. I noticed that the two gold connectors were bent from me opening it so I replaced the lightning flex cable. Still no home button. so I finally replaced the home button flex cable and it still doesn't work. What can I do??? ive replaced everything I can to get it to work and it still doesn't work!! HELP!!!

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

6 Ответов

Наиболее полезный ответ

If you open up and leave screen and all connected and press power to make phone sleep don't turn off.. Now with a screw driver touch the two metal prongs with the metal shaft at the same time this should light up your screen as if you were pressing the home button and will tell you that the part is working.. Do this first and report back

Был ли этот ответ полезен?

Оценка 3

1 Комментарий:

If you touching the two conectors with metal and it's not accivating the screen the try a new charging port it makes contact with the home button..

из

Добавить комментарий

Do what con says. Also, does it feel normal? What happens when you press the home button? if it does not spring back up, you might be missing a tiny, but important metallic square that goes on the back of the home button

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

My home button doesn't work so i replaced the ribbon cable, still no joy. However, if I press on either side of the home button while pressing the home button it works!

Maybe see if that makes the home button work?

If so, how would you fix that?

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

I tried what Con suggested and didn't have any luck. I replaced my battery last night andd since then my home button wont work. I tried bridging those two connectors and it doesn't do anything either. Any idea what else it could be?

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

Yes, when replacing your battery, you must have pried between the battery and the logic board, just next to the sim slot. This is a common mistake that causes damage to components in that area that control the function of the home button and also of the power button.

из

Добавить комментарий

If you actually made a good connection between the two leads, it's more likely that you have an open filter ( acts like a fuse) in the logic board.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

how do you fix the open filter ???

Был ли этот ответ полезен?

Оценка 0

2 Комментариев:

You replace it.

из

well, bit more specific please :-)

Where do i find it ? easy to replace or fideling like heck with solderingiron ???

из

Добавить комментарий
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 429