Перейти к основному содержанию

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1203вопросов Показать все

No video after LCD replacement

A customer brought me her 2007 MacBook (white) with a broken screen. I bought a new LCD and proceeded to replace it. After the install, I powered up the unit and got a flicker of light on the left side of the screen and a fizzing noise. The video immediately faded to black. Now on start up, all I get is a black screen. To my knowledge, I do have external video. As well, I reset the PRAM and power management. Any ideas?

Thanks!

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка -1
1 Комментарий

Took everything back apart and I do have a (very) faint image. I am guessing now it's the inverter board. I will try this next. Thanks for the suggestions!!!

из

Добавить комментарий

2 Ответов

Выбранное решение

It would help if you could tell us if you see a faint image of the desktop when passing a light source over the Apple on display back cover. We want to know if you get a video feed or not cause the problem could simply be the inverter cable or inverter board. If you replaced the whole display assy with a known working one then the issue could be logic board related since the cables could have shorted in the hinge and damaged the inverter circuitry on the logic board.

Был ли этот ответ полезен?

Оценка 1

1 Комментарий:

+ for the link answer Machead used to you

из

Добавить комментарий
Наиболее полезный ответ

If you have external video

it's not the graphics chip - which leaves inverter, fuse and cables.

Check out this similar problem.

Good Luck,

N.

Был ли этот ответ полезен?

Оценка 1

1 Комментарий:

nice link +

из

Добавить комментарий

Добавьте свой ответ

shull будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 1,525