Перейти к основному содержанию

Repair information for the Bose QuietComfort 2 acoustic noise-canceling headphones. Released in 2003. Model number: QC2.

24вопросов Показать все

How do I take the Silver cover off

I have a problem with the right headphone and I suspect a wire issue but I need to take the cover off to be like this picture:

http://hackaday.com/2013/12/07/repairing...

Any help is geatly appreciated

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка -1
Добавить комментарий

1 ответ

Sam soud, to get to the wiring, you will have to remove the parts on the inside, not the outside (silver cover) . Check this quick and dirty guide for a similar model. Hope this helps, good luck.

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

Thank you for the hint!

I Can cut the wires and replace them from the inside , but it might not work,.

As you can see that the wires extends to the electronic board, I want to reach to the board in order to see if the wires are disconnected ( less likley)

из

Добавить комментарий

Добавьте свой ответ

Sam Soud будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 906