Перейти к основному содержанию

Miniature one watt version of the classic Marshall half stack. With a tone knob and overdrive channel, it offers portability without sacrificing playability.

7вопросов Показать все

Micro Amp Battery power not working.

My MS-2R micro amp by Marshall has never failed me in the past but I recently noticed that when I try to use battery power it doesn't work. The wall input works and sounds fine but the battery power doesn't work. I have replaced and used at least 3 different batteries but still no solution.

please help, have a nice day

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 1
Добавить комментарий

1 ответ

Наиболее полезный ответ

Had same problem

I Took the thing apart and there was nothing wrong, I took the wires off the battery contacts and put them directly onto the battery and it worked. So I discovered the problem was the battery wasn't wedged up against the the contacts hard enough. So I cut a piece of card and folded it in half and wedged the battery in there. Switched it on and it started first time, never had a problem since

Был ли этот ответ полезен?

Оценка 1

1 Комментарий:

Ahhh thank you!! This worked for me - I also had looked inside and all wires seemed fine - did as you suggested and bingo!

из

Добавить комментарий

Добавьте свой ответ

Jellyfish будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 6

За последние 30 дней: 22

За всё время: 3,009