Перейти к основному содержанию

Repair guides and support for LED, LCD, HD and other Vizio TVs.

813вопросов Показать все

TV wont turn on. power light turns on, blinks, then shut's off

Vizio e500i-a0 wont turn on. Tried unplugging it and holding down the power button per Vizio tech support. Tech support believes it's the power supply. Received a quote ffrom an authorized repair shop for $275. Foind the power supply board online for $30. Would rather fix it ourselves if possible. Any help would be appreciated!

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 1
Добавить комментарий

6 Ответов

Наиболее полезный ответ

My vizio tv was working now it won't power on but the vizio light lights up..

Был ли этот ответ полезен?

Оценка 2
Добавить комментарий

Sounds like it could either be a power board or main board issue. If you're confident in opening up your TV, replacing either boards is pretty straight forward. Just be careful unplugging any wires/ribbons. For vizio parts, you can try Vizparts

Был ли этот ответ полезен?

Оценка 0

Комментарии:

Is there a way to check which board it would be or some diagnostic I could run? Reset. Held power button. Checked cords. Boards seen fine nothing looks off.

из

Добавить комментарий

Try checking the main bord out put processor to see if it is getting power. Or it might be a bad Ribon cable try shining a broth light on the screen at different angles to see if there’s a picture If there is a picture it’s the backlight driver board I’ve had a lot of problems with Visio’s dropping back like drivers

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

large vizio smart tv.. worked fine, moved to another room and tv wont turn on via remote or tv buttons. unplugged tv and plugged back in and tv light comes on and fades out... tried piwer cycling, leaving unplugged for a day, etc. remote nor tv buttons do anything... BUT

BY Chance i was setting up my much older vizio tv right infront of it AND MY OLD REMOTE TURNED BOTH TVs ON... i got my new remote working once after removing/replacing batteries... my new smart tv remote and the buttons on tv still dont work

so, IM USING AN OLD VIZIO REMOTE and it works just fine... go figure...

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

I have a vizio d50u-d1. No picture, has sound. The white power light comes on and fades away. I replaced the power board and still no luck. On the main board there is a small solid red light that comes on. Is that my next step ? Someone mentioned the led strips but I wasn't having any issues with the picture itself fading.

Был ли этот ответ полезен?

Оценка 0

Комментарии:

55 vizio won't turn on but the white light blikes 13 times then won't do nothing

из

Добавить комментарий

Vizio TVs are prone to develop power failures for one of two reasons: 1) the power board has blown some electrolytic caps, and they need to be replaced, or 2) the main board has blown one or more of six low-voltage DC regulators (AMC1117). The parts are cheap, and if you’re comfortable with disassembling the set and performing some PCB repair work, you can do it at home.

Unfortunately, schematics are impossible to find and the debug information Vizio gives out is minimal. I had to make a couple of passes on my VX32L main board to find the bad regulator. With a datasheet for the AMC1117 you can figure out which one is dead, using just a voltmeter. Have a high-wattage soldering iron ready to deal with the tin solder, and a good magnifier.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

lety будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 24

За последние 7 дней: 195

За последние 30 дней: 878

За всё время: 52,355