Перейти к основному содержанию

The iMac G5, powered by the PowerPC G5 processor, was originally released in August 2004.

453вопросов Показать все

iMac G5 with intermittent power on

Hi,

I have an iMac that starts up fine most of the time.

It can go for days working just fine.

When it fails, a push to the power button does NOTHING.

Inevitably, if I try enough times it works fine!

Any ideas?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка -1
Добавить комментарий

1 ответ

Наиболее полезный ответ

Probably a failing power supply. To get you to the correct part we would need to know your exact machine. The power supply probably has to cool down before a restart. Open it up and look at where the power leads enter the power supply form the motherboard. If you see a burned area close by, you will know for sure. Opening up this one is usually a matter of three screws on the bottom of the frame. The part looks like this: [связанный продукт отсутствует или отключен: IF165-002]

Here's how to get to the typical G5 iMac power supply:iMac G5 17" Model A1058 Power Supply Replacement

Again, check your model, it's located on the bottom of the stand.

Был ли этот ответ полезен?

Оценка 1

1 Комментарий:

The iMac is a first generation 17" iMac and has no burned leads. It has a apple 661-3351 power supply.

You suspect the power supply, but when I run through apple's iMac test procedure,

http://support.apple.com/kb/ht2173

none of the buttons get the cool iMac to start up - when it's in failure mode (like today).

Do you still think it's the power supply?

из

Добавить комментарий

Добавьте свой ответ

bsmith1 будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 1,076