iPod doesn't turn on after battery replacement, What should I do?

Question

iPod Nano 1st Generation

Model A1137 / 1, 2, or 4 GB capacity / black or white plastic front

68вопросов Показать все

Ira @ira55288

Репутация: 1

Опубликовано: 6 фев 2015 г.

Опции

iPod doesn't turn on after battery replacement, What should I do?

My iPod nano turned on for a short period of time before it went completely dead, wouldn't turn on no matter what, connecting to the computer or charging. So I replaced the battery. The screen is also cracked. I have not yet replaced the screen since I'm still waiting for the part. Now I plug it in to my computer and still there is no sign of life. Any ideas? Do you think I might have ruined the logic board during the battery replacement or something?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

2 Ответов

Dingo Dash @dingodash Репутация: 25 1 · Answer 1 · 2019-03-15T12:35:19-07:00

Наиболее полезный ответ

Dingo Dash @dingodash

Репутация: 25

1

Опубликовано: 15 мар 2019 г.

Опции

Another possibility is that the connector pins inside the ipod have slipped from their place, by blending themselves. If you remove the black tape from the connector, you might find something like this:

I know maybe it’s way too late for you but, I have done lots of research and this kind of issue seems to be totally un-documented.

By the way, if it’s your case on anyone else’s searching for some luck then try to push them back in place and see if it enters in charging mode.

Был ли этот ответ полезен?

Да Нет

Оценка 2

Добавить комментарий