Репутация: 85
2
2
So a few days ago I dropped my phone and the screen popped out of the iphone mainframe, I popped it back in but now the screen wont work and I can press down the phone like its still not in properly. Siri still works and I can hear things but when I tried to hard boot it, it stopped responding completely. What do I do?
Это хороший вопрос?
Репутация: 1,5к
22
9
4
One solution to your problem is to make sure that the connection between the display module and the logic board of the phone is intact. Dropping the phone may have dislodged the connection, with continued use causing the internal cable to disconnect. Follow the iFixit iPhone 5c Display Assembly Repair Guide for help finding the connectors for the Front Panel.
Был ли этот ответ полезен?
I have the same problem but when I popped my screen back in it had a black splodge in the screen display I don't know what it is
Means the screen LCD display is damaged. Since the LCD and digitizer are fused together you will need a iPhone 5c Front Panel Replacement.
Репутация: 16,1к
39
92
13
Use this guide but stop at level 8 and do it backwards
Был ли этот ответ полезен?
well same thing had happened here but what i did was hold the home button while holding the power off button and it worked and i was like freaking out before but it worked so i hope this help ^.^
Был ли этот ответ полезен?
well what i did to fix it was hold the home an d power off button at the same time and well ah it was fixed hope it helps bye. ^>^
Был ли этот ответ полезен?
За последние 24часов: 1
За последние 7 дней: 4
За последние 30 дней: 6
За всё время: 13,510
did you solve this bc i have the same issue and i was wondering what did you do?
из hchinchillajr
Replacing the screen is what you do if you already tried reseating the front panel connectors. The LCD cable is fragile on the 5c and can easily rip on drop.
из Ben